×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2007 Toyota Tacoma Water Pump
H2O Pump- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Water Pumps found
Product Specifications- Other Name: Pump Assembly, Water; Engine Water Pump; Water Pump Assembly; Pump Assembly, Engine Water
- Replaces: 16100-39405, 16100-39406, 16100-09470
- Part Name Code: 16100
- Item Weight: 5.50 Pounds
- Item Dimensions: 14.4 x 10.6 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16100-09471
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2007 Toyota Tacoma Water Pump
Part Number: 16100-79445-83$87.52 MSRP: $123.10You Save: $35.58 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Pump Assembly, Water; Engine Water Pump; Water Pump Assembly
- Replaces: 16100-79245, 16100-79445, 16100-09460, 16100-79255
- Item Weight: 3.90 Pounds
- Item Dimensions: 9.2 x 6.3 x 5.9 inches
- Condition: New
- SKU: 16100-79445-83
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2007 Toyota Tacoma Water Pump
Looking for affordable OEM 2007 Toyota Tacoma Water Pump? Explore our comprehensive catalogue of genuine 2007 Toyota Tacoma Water Pump. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2007 Toyota Tacoma Water Pump Parts Q&A
- Q: How to remove and install a water pump on 2007 Toyota Tacoma?A: The water pump removal requires starting with disconnecting the negative cable from the battery terminal followed by disassembly of the No. 1 engine under cover sub-assembly using the removal sequence of all 4 bolts. Drain the engine coolant while taking out the 3 bolts from the radiator support to frame seal LH and fan shroud and generator assembly and V-ribbed belt tensioner assembly. The first step toward water pump assembly removal must involve the removal of 10 bolts and the gasket. Visual examination of the water hole and air hole should be done to inspect coolant leaks. If leakage occurs the water pump needs replacement. Physical testing of the water pump bearing by turning the pulley seat will reveal motion without any noise; the pump must be replaced when necessary. Installation requires a new gasket and the water pump which must be put in place using the 10 bolts and tightening bolt A to 21 Nm (214 kgf-cm, 15 ft. lbs.) while bolt B reaches 9 Nm (92 kgf-cm, 80 inch lbs.). Secure and tighten bolt B of the V-ribbed belt tensioner first to 40 Nm (408 kgf-cm, 30 ft. lbs.) before torquing bolt A to 21 Nm (214 kgf-cm, 16 ft. lbs.). To install Bolt C position the bolt holes of the V-ribbed belt tensioner and timing chain cover correctly before tightening Bolt C to 43 Nm (434 kgf-cm, 32 ft. lbs.). Put the generator assembly together with the fan shroud, radiator support until they reach frame seal LH. The negative battery terminal receives a cable which requires a torque setting of 3.9 Nm (40 kgf-cm, 35 inch lbs.) then follows additive engine coolant procedures and under cover sub-assembly No. 1 gets installed with 4 bolt attachments at 30 Nm (306 kgf-cm, 22 ft. lbs.).