Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear; Belt Assembly, Rear Seat 3 Point Type, Outer Passenger Side; Belt Assembly, Rear Seat 3 Point Type, Outer Driver Side
Manufacturer Note: IVORY,TRIM0#
Position: Rear
Replaces: 73360-AA090-A0
Item Weight: 3.20 Pounds
Item Dimensions: 12.0 x 11.1 x 8.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73360-AA091-A0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2007 Toyota Solara Submodels:
SE, SE Sport, SLE, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS
Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear; Belt Assembly, Rear Seat 3 Point Type, Outer Passenger Side; Belt Assembly, Rear Seat 3 Point Type, Outer Driver Side
Position: Rear
Replaces: 73360-AA090-B0
Item Weight: 3.20 Pounds
Item Dimensions: 12.3 x 10.8 x 8.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73360-AA091-B0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2007 Toyota Solara Submodels:
SE, SE Sport, SLE, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS
Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear; Belt Assembly, Rear Seat 3 Point Type, Outer Passenger Side; Belt Assembly, Rear Seat 3 Point Type, Outer Driver Side
Manufacturer Note: SHADOW GRAY,TRIM11
Position: Rear
Replaces: 73360-AA090-B1
Item Weight: 3.00 Pounds
Item Dimensions: 12.1 x 11.2 x 8.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73360-AA091-B1
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2007 Toyota Solara Submodels:
SE, SE Sport, SLE, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS
Other Name: Belt Assembly, Rear Seat I; Seat Belt Receptacle, Rear; Belt Assembly, Rear Seat Inner W/Center, Passenger Side; Belt Assembly, Rear Seat Inner W/Center, Driver Side
Manufacturer Note: IVORY,TRIM0#
Position: Rear
Item Weight: 2.40 Pounds
Item Dimensions: 13.6 x 10.1 x 5.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73470-06050-A0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Left; Belt Assembly, Front Seat Outer, Driver Side
Position: Driver Side
Part Name Code: 73220
Item Weight: 4.40 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 73220-AA030-B0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2007 Toyota Solara Submodels:
SE, SE Sport, SLE, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS
| Page 1 of 2 |Next >
1-20 of 34 Results
2007 Toyota Solara Seat Belt
Looking for affordable OEM 2007 Toyota Solara Seat Belt? Explore our comprehensive catalogue of genuine 2007 Toyota Solara Seat Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2007 Toyota Solara Seat Belt Parts Q&A
Q: How to Remove and Replace the Rear Seat Inner Seat Belt Assembly on 2007 Toyota Solara?
A: The procedure for removing the rear seat inner belt assembly requires beginning with the rear seat cushion assembly removal followed by handling the rear seatback assemblies from both left and right sides then moving to the rear seatback hinge sub-assemblies from both sides. Starting the process requires removal of the front door scuff plates and the quarter trim panel assemblies from both front left and right doors and the center pillar garnishes and roof side garnish assemblies. The next step requires the disassembly of upper quarter trim panel assemblies together with package tray trim panel assembly where you must follow the illustrations for disengaging clips and claws. Proceed to eliminate both CRS anchor brackets through unfastening their corresponding nuts followed by removing the rear seat inner with center belt assemblies by unfastening necessary bolts and nuts. The CRS tether anchor bracket becomes removable after three bolt screw removal. Start the CRS tether anchor bracket installation by bolting it with three bolts at 42 N.m torque pressure (430 kgf.cm, 31 ft.lbf). The rear seat inner center with belt assembly installation on the right side must happen through the use of this nut which requires the same torque level until the anchor part avoids touching the floor panel's protruding section. Check the tilt degree of the ELR lock for the left side and verify retractor angle before using two bolts at 42 N.m (430 kgf.cm, 31 ft.lbf) to fasten the inner belt. Keep the floor panel clear while performing this installation step. Test the automatic retraction of belts as part of the ELR lock mechanism while also making sure the restraint system fasteners work properly. The CRS anchor bracket installation begins with the right side anchor bracket receiving two nuts which require 18.1 N.m (185 kgf.cm, 13 in.lbf), except for the left side that needs a matching torque application.