Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear; Belt Assembly, Rear Seat 3 Point Type, Outer Passenger Side; Belt Assembly, Rear Seat 3 Point Type, Outer Driver Side
Manufacturer Note: IVORY,TRIM0#
Position: Rear
Replaces: 73360-AA090-A0
Item Weight: 3.20 Pounds
Item Dimensions: 12.0 x 11.1 x 8.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73360-AA091-A0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Solara Submodels:
SE, SE Sport, SLE, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS
Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear; Belt Assembly, Rear Seat 3 Point Type, Outer Passenger Side; Belt Assembly, Rear Seat 3 Point Type, Outer Driver Side
Position: Rear
Replaces: 73360-AA090-B0
Item Weight: 3.20 Pounds
Item Dimensions: 12.3 x 10.8 x 8.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73360-AA091-B0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Solara Submodels:
SE, SE Sport, SLE, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS
Other Name: Belt Assembly, Rear Seat I; Seat Belt Receptacle, Rear; Belt Assembly, Rear Seat Inner W/Center, Passenger Side; Belt Assembly, Rear Seat Inner W/Center, Driver Side
Manufacturer Note: IVORY,TRIM0#
Position: Rear
Item Weight: 2.40 Pounds
Item Dimensions: 13.6 x 10.1 x 5.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73470-06050-A0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Left; Belt Assembly, Front Seat Outer, Driver Side
Position: Driver Side
Part Name Code: 73220
Item Weight: 4.40 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 73220-AA030-B0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Solara Submodels:
SE, SE Sport, SLE, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS
| Page 1 of 2 |Next >
1-20 of 34 Results
2008 Toyota Solara Seat Belt
Looking for affordable OEM 2008 Toyota Solara Seat Belt? Explore our comprehensive catalogue of genuine 2008 Toyota Solara Seat Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota Solara Seat Belt Parts Q&A
Q: How to Properly Install a Seat Belt for a Coupe's Rear Seat Inner Belt Assembly on 2008 Toyota Solara?
A: Attachment of the Coupe rear seat inner belt requires the installation of 3 anchor brackets through 3 bolts reaching 42 Nm (430 kgf-cm, 31 ft-lbf) torque. Next the right-hand rear seat inner with center belt assembly requires installation through the attachment of an inner belt nut which becomes torqued to 42 Nm (430 kgf-cm, 31 ft-lbf) with maintenance of the anchor part away from the floor panel protrusions. A check of retractor function on the left-hand side must be done without disassembling the retractor until the belt shows signs of locking the ELR at 15 degrees or less or reaches lock at 45 degrees or above. Replacing the belt assembly becomes necessary when the conditions are not achieved. The installer should fasten the inner belt to the chassis with 2 bolts while tightening them to 42 Nm (430 kgf-cm, 31 ft-lbf) torque before confirming the anchor part does not touch the floor panel. Quickly pulling the belt helps check whether the ELR lock operates properly; if not, replace the belt assembly. The child restraint system's belt fastening capability needs to be tested through outer belt assembly installation: it must automatically pull in when you pull the complete length of belt and it should re-pull and retract once more after the initial pull in action. A belt assembly replacement is necessary in case these functional specifications cannot be met. You need to conduct the same procedure by installing the CRS anchor bracket onto the right-hand side followed by torquing two nuts to 18.1 Nm (185 kgf-cm, 13 ft-lbf) before installing the left-hand side bracket.