My Garage
Cart

OEM 2007 Toyota Sienna Clock Spring

Spiral Cable Clock Spring
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Clock Spring found

  • 2007 Toyota Sienna Clock Spring - 84306-06030
    2007 Toyota Sienna Clock Spring Diagram - 84306-06030
    View related parts

    2007 Toyota Sienna Clockspring

    Part Number: 84306-06030
    $300.79 MSRP: $429.46
    You Save: $128.67 (30%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Cable Sub-Assembly, Spiral; Air Bag Clockspring
    • Replaces: 84306-33080
    • Part Name Code: 84306
    • Item Weight: 1.20 Pounds
    • Item Dimensions: 6.5 x 5.7 x 5.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 84306-06030
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2007 Toyota Sienna Submodels:
    • CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

2007 Toyota Sienna Clock Spring

Looking for affordable OEM 2007 Toyota Sienna Clock Spring? Explore our comprehensive catalogue of genuine 2007 Toyota Sienna Clock Spring. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota Sienna Parts Questions & Experts Answers

  • Q: How do you service the Clock Spring Assembly / Spiral Cable on 2007 Toyota Sienna?
    A: Your service of the Clock Spring Assembly / Clock Spring should begin by properly understanding all the information in the Restraint Systems Service Precautions document. Wait for 90 seconds after battery cable removal from the negative terminal to avoid Air Bag deployment. First position the front wheels in a straight-ahead direction. Next remove starting with the Steering Wheel No.3 Cover Lower and then the Steering Wheel No.2 Cover Lower, Steering Pad, Steering Wheel Assembly and finally remove the Steering Column Cover by detaching its 2 screws. Detach connectors from the clock spring while shielding the Air Bag wire harness from damage and then dislodge the clock spring with its 3 claws to accomplish removal. To prevent pin damage install the parts when front wheels face forward and turn signal switch stands at the neutral position. Reattach the connectors after installing the clock spring while removing the lock pin only if replacing it with a new one. Begin the installation of the Steering Column Cover by torquing the 2 screws before testing for a dead chassis and battery(-) terminal disconnection lasting at least 90 seconds. Start the clock spring rotation by turning it counterclockwise slowly until it stops before gradually using clockwise turns up to 2.5 times to achieve proper alignment alongside the markers without touching the Air Bag wire harness. The Steering Wheel Assembly must be mounted while performing a steering wheel center point check followed by Installation of the Steering Pad alongside the Steering Wheel No.2 Cover Lower and Steering Wheel No.3 Cover Lower. The cable connection to the negative battery terminal should be restored after checking the Steering Pad followed by system initialization since the system needs it before removing the cable. The inspection of SRS warning light completes the maintenance routine.

Related 2007 Toyota Sienna Parts