OEM 2007 Toyota RAV4 Antenna Cable

2007 Toyota RAV4 Parts Questions & Experts Answers

• Q: How to service the radio antenna cable on 2007 Toyota RAV4?

  A: Service of the radio antenna cord requires the negative battery cable disconnect followed by a minimum 90-second wait to avoid activating Air Bag and seat belt pretensioners. Service begins with removal of the instrument cluster finish panel sub-assembly followed by combination meter assembly and three instrument cluster finish panel centers. Work continues with radio receiver assembly with bracket joined by an instrument panel register assembly center and glove compartment door assembly and front pillar garnishes. Finally, detach the instrument panel sub-assembly upper. First detach the antenna cord sub-assembly by removing 4 clamps after disconnecting its connector. You can begin antenna cord sub-assembly installation through attaching the 4 clamps then establishing connector connection. Install the instrument panel sub-assembly upper followed by front pillar garnish LH then front pillar garnish RH and glove compartment door assemblysequently install the instrument panel register assembly center along with radio receiver assembly with bracket (w/ Radio Receiver) then No. 1 instrument cluster finish panel center and No. 2 instrument cluster finish panel center before adding the combination meter assembly and instrument cluster finish panel sub-assembly. The procedure ends by joining the cable to the negative battery terminal.