OEM 2006 Toyota RAV4 Antenna Cable

2006 Toyota RAV4 Parts Questions & Experts Answers

• Q: How to service the radio antenna cable on 2006 Toyota RAV4?

  A: Service of the radio antenna cable begins by disconnecting the negative battery terminal wire with a minimum waiting time of 90 seconds to stop Air Bag and seat belt pretensioner activation. The service on the radio antenna cord begins by uninstalling these components: instrument cluster finish panel sub-assembly along with combination meter assembly, No. 2 instrument cluster finish panel center, No. 1 instrument cluster finish panel center, radio receiver assembly with bracket (w/ Radio Receiver), instrument panel register assembly center, glove compartment door assembly, front pillar garnish LH, front pillar garnish RH, and instrument panel sub-assembly upper. Disassemble the antenna cord sub-assembly by unconnecting its connector followed by removing the 4 clamps. To install the antenna cord sub-assembly you should first apply the 4 clamps then connect the connector. Start by installing the instrument panel sub-assembly upper followed by front pillar garnish LH and RH the glove compartment door assembly then the instrument panel register assembly center the radio receiver assembly with bracket (w/ Radio Receiver) and finish by installing No. 1 instrument cluster finish panel center No. 2 instrument cluster finish panel center combination meter assembly and instrument cluster finish panel sub-assembly. The procedure ends by attaching the wire to the negative battery post.