How to service the Center Air Bag Sensor Assembly on 2007 Toyota Highlander?

All services involving the Center Air Bag Sensor Assembly should start with following the Restraint Systems Service Precautions. The post-doctoral research service requires the removal of the negative cable battery connection for 90 seconds to stop Air Bag deployment. Proceed by eliminating floor carpet covers from both left and right center panels together with instrument cluster finish panel assembly center, the rear console box lower component, the box bottom mat, and the console box assembly. First disconnect the three connectors from the center Air Bag sensor assembly before removing its three bolts and lastly detach air ducts Number 1 and Number 2 rear. Start the installation only after disconnecting the battery negative terminal and turning off the ignition switch for 90 seconds. Install the center Air Bag sensor assembly but only temporarily with its 3 bolts but replace it before returning it to service if it has been involved in any drops or displays any defects. Fasten the bolts according to a torque setting of 17.5 N.m (179 kgf.cm, 13 ft.lbf) then perform a loose bolt check. Rejoin the three connectors while checking that the waterproof sheet is correctly installed. The repair sequence for this step includes setting back the air ducts No. 1 and No. 2 rear while reinstalling the console box assembly and box bottom mat and the rear console box lower and instrument cluster finish panel assembly center as well as the floor carpet covers for both sides of the center. To finish integrate the cable at the negative battery terminal then execute system initialization if necessary before checking the SRS warning light.

OEM 2007 Toyota Highlander Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Air Bag Sensors found

View related parts
2007 Toyota Highlander Sensor, Air Bag, Front Passenger Side
Part Number: 89173-49295
$124.77 MSRP: $151.72
You Save: $26.95 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Front; Sensor, Air Bag, Front Driver Side; Air Bag Sensor
- Position: Front
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.9 x 3.0 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89173-49295
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
View related parts
2007 Toyota Highlander Side Impact Sensor, Front
Part Number: 89860-48030
$212.25 MSRP: $260.31
You Save: $48.06 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Side Air Bag; Air Bag Impact Sensor, Center, Front; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side; Sensor Assembly, Side Air Bag, Driver Side
- Manufacturer Note: SRS AIR BAG-DRIVER & PASSENGER & SIDE & CURTAIN
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89860-48030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
View related parts
2007 Toyota Highlander Rear Sensor, Driver Side
Part Number: 89834-48020
$133.59 MSRP: $189.10
You Save: $55.51 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Rear Left; Air Bag Sensor; Impact Sensor; Side Impact Sensor; Side Sensor; Sensor, Air Bag, Rear Driver Side
- Manufacturer Note: SRS AIR BAG-DRIVER & PASSENGER & SIDE & CURTAIN
- Position: Rear Driver Side
- Part Name Code: 89834
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.4 x 2.7 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89834-48020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
View related parts
2007 Toyota Highlander Sensor, Air Bag, Rear Passenger Side
Part Number: 89833-48020
$123.81 MSRP: $175.27
You Save: $51.46 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Side Air Bag; Air Bag Sensor
- Manufacturer Note: SRS AIR BAG-DRIVER & PASSENGER & SIDE & CURTAIN
- Position: Rear Passenger Side
- Part Name Code: 89833
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.5 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89833-48020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
View related parts
2007 Toyota Highlander Position Sensor, Front Driver Side
Part Number: 89178-33050
$89.81 MSRP: $126.06
You Save: $36.25 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Seat Position; Air Bag Seat Sensor Mat, Front Left; Seat Track Position Sensor, Left; Occupant Sensor; Passenger Discriminating Sensor; Discriminating Sensor; Sensor; Sensor, Seat Position Air Bag
- Position: Front Driver Side
- Part Name Code: 89178A
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.1 x 1.6 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89178-33050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, SE, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS

2007 Toyota Highlander Air Bag Sensor

Looking for affordable OEM 2007 Toyota Highlander Air Bag Sensor? Explore our comprehensive catalogue of genuine 2007 Toyota Highlander Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota Highlander Air Bag Sensor Parts Q&A

Q: How to service the Center Air Bag Sensor Assembly on 2007 Toyota Highlander?
A: All services involving the Center Air Bag Sensor Assembly should start with following the Restraint Systems Service Precautions. The post-doctoral research service requires the removal of the negative cable battery connection for 90 seconds to stop Air Bag deployment. Proceed by eliminating floor carpet covers from both left and right center panels together with instrument cluster finish panel assembly center, the rear console box lower component, the box bottom mat, and the console box assembly. First disconnect the three connectors from the center Air Bag sensor assembly before removing its three bolts and lastly detach air ducts Number 1 and Number 2 rear. Start the installation only after disconnecting the battery negative terminal and turning off the ignition switch for 90 seconds. Install the center Air Bag sensor assembly but only temporarily with its 3 bolts but replace it before returning it to service if it has been involved in any drops or displays any defects. Fasten the bolts according to a torque setting of 17.5 N.m (179 kgf.cm, 13 ft.lbf) then perform a loose bolt check. Rejoin the three connectors while checking that the waterproof sheet is correctly installed. The repair sequence for this step includes setting back the air ducts No. 1 and No. 2 rear while reinstalling the console box assembly and box bottom mat and the rear console box lower and instrument cluster finish panel assembly center as well as the floor carpet covers for both sides of the center. To finish integrate the cable at the negative battery terminal then execute system initialization if necessary before checking the SRS warning light.