How to service the side Air Bag sensor on the LH side on 2006 Toyota Highlander?

The service process for the LH side Air Bag sensor begins by studying all precautions in the Air Bag Systems documentation. A 90-second delay should be observed after negative battery cable removal to avoid Air Bag activation. Service this repair by eliminating the front door scuff plate LH (with or without Rear No. 2 Seat), rear door scuff plate LH (with or without Rear No. 2 Seat), rear door Weather Strip LH, and front door Weather Strip LH, center pillar garnish lower LH. The necessary step requires separation of the front seat outer belt assembly and the side Air Bag sensor LH through connector detachment and 3 bolt removal. Begin installation only after the ignition is off and disconnecting the negative terminal for at least 90 seconds. It is essential to install the side Air Bag sensor LH using 3 bolts torqued to 17.5 N.m (179 kgf.cm, 13 ft.lbf) while discarding it if it experiences drops or presents any defects. The SRS wiring must lie in a manner that avoids collision with other parts as well as pinching conditions. The installation process requires inspection of loose components after which you should reconnect the connector to the side Air Bag sensor LH before reinstalling the front seat outer belt assembly and other parts including center pillar garnish lower LH and front door Weather Strip LH plus rear door Weather Strip LH together with both front and rear door scuff plates LH. The last step involves wiring the cable to the negative battery terminal followed by system initialization when needed before you verify the SRS warning light function.

OEM 2006 Toyota Highlander Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Air Bag Sensors found

View related parts
2006 Toyota Highlander Sensor, Air Bag, Front Passenger Side
Part Number: 89173-49295
$124.77 MSRP: $151.72
You Save: $26.95 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Front; Sensor, Air Bag, Front Driver Side; Air Bag Sensor
- Position: Front
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.9 x 3.0 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89173-49295
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
View related parts
2006 Toyota Highlander Side Impact Sensor, Front
Part Number: 89860-48030
$212.25 MSRP: $260.31
You Save: $48.06 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Side Air Bag; Air Bag Impact Sensor, Center, Front; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side; Sensor Assembly, Side Air Bag, Driver Side
- Manufacturer Note: SRS AIR BAG-DRIVER & PASSENGER & SIDE & CURTAIN
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89860-48030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
View related parts
2006 Toyota Highlander Rear Sensor, Driver Side
Part Number: 89834-48020
$133.59 MSRP: $189.10
You Save: $55.51 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Rear Left; Air Bag Sensor; Impact Sensor; Side Impact Sensor; Side Sensor; Sensor, Air Bag, Rear Driver Side
- Manufacturer Note: SRS AIR BAG-DRIVER & PASSENGER & SIDE & CURTAIN
- Position: Rear Driver Side
- Part Name Code: 89834
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.4 x 2.7 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89834-48020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
View related parts
2006 Toyota Highlander Sensor, Air Bag, Rear Passenger Side
Part Number: 89833-48020
$123.81 MSRP: $175.27
You Save: $51.46 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Side Air Bag; Air Bag Sensor
- Manufacturer Note: SRS AIR BAG-DRIVER & PASSENGER & SIDE & CURTAIN
- Position: Rear Passenger Side
- Part Name Code: 89833
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.5 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89833-48020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
View related parts
2006 Toyota Highlander Position Sensor, Front Driver Side
Part Number: 89178-33050
$89.81 MSRP: $126.06
You Save: $36.25 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Seat Position; Air Bag Seat Sensor Mat, Front Left; Seat Track Position Sensor, Left; Occupant Sensor; Passenger Discriminating Sensor; Discriminating Sensor; Sensor; Sensor, Seat Position Air Bag
- Position: Front Driver Side
- Part Name Code: 89178A
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.1 x 1.6 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89178-33050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, SE, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS

2006 Toyota Highlander Air Bag Sensor

Looking for affordable OEM 2006 Toyota Highlander Air Bag Sensor? Explore our comprehensive catalogue of genuine 2006 Toyota Highlander Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Toyota Highlander Air Bag Sensor Parts Q&A

Q: How to service the side Air Bag sensor on the LH side on 2006 Toyota Highlander?
A: The service process for the LH side Air Bag sensor begins by studying all precautions in the Air Bag Systems documentation. A 90-second delay should be observed after negative battery cable removal to avoid Air Bag activation. Service this repair by eliminating the front door scuff plate LH (with or without Rear No. 2 Seat), rear door scuff plate LH (with or without Rear No. 2 Seat), rear door Weather Strip LH, and front door Weather Strip LH, center pillar garnish lower LH. The necessary step requires separation of the front seat outer belt assembly and the side Air Bag sensor LH through connector detachment and 3 bolt removal. Begin installation only after the ignition is off and disconnecting the negative terminal for at least 90 seconds. It is essential to install the side Air Bag sensor LH using 3 bolts torqued to 17.5 N.m (179 kgf.cm, 13 ft.lbf) while discarding it if it experiences drops or presents any defects. The SRS wiring must lie in a manner that avoids collision with other parts as well as pinching conditions. The installation process requires inspection of loose components after which you should reconnect the connector to the side Air Bag sensor LH before reinstalling the front seat outer belt assembly and other parts including center pillar garnish lower LH and front door Weather Strip LH plus rear door Weather Strip LH together with both front and rear door scuff plates LH. The last step involves wiring the cable to the negative battery terminal followed by system initialization when needed before you verify the SRS warning light function.