How to replace the Air Bag Sensor Rear LH on 2005 Toyota Highlander?

The first step to replace the Air Bag Sensor Rear LH demands following restraint system service precautions and disconnecting the negative terminal of the battery. Customers should unfasten the tonneau cover assembly and deck floor box rear and rear floor finish plate together with the deck side trim box LH and deck side trim box RH and deck side trim cover LH and rope hook and deck trim side panel assembly LH. Completely remove the air bag sensor rear LH by unplugging the connector then taking out its two bolts. Always disconnect the car battery and leave it untouched for at least 90 seconds before starting any installation work. The installation process should occur when the ignition switch is off. Install the Air Bag sensor rear LH using its 2 bolts and torque the bolts to a value of 17.5 Nm (179 kgf.cm, 13 ft.lbf). The Air Bag sensor rear LH requires replacement with a new part whenever it demonstrates dropped status and combines cracking, denting, or conspicuous defects. The SRS wiring needs proper placement during installation and must stay clear from other parts for obstructions. Validation of the installation requires inspecting the parts for possible looseness by connecting the connector to the Air Bag sensor rear LH. The procedure ends by reconnecting the battery negative terminal followed by checking the SRS warning light.

OEM 2005 Toyota Highlander Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Air Bag Sensors found

View related parts
2005 Toyota Highlander Sensor, Air Bag, Rear
Part Number: 89834-0E010
$160.49 MSRP: $227.20
You Save: $66.71 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR, AIR BAG, RR; Air Bag Sensor
- Position: Rear Driver Side
- Replaces: 89834-48010
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.7 x 2.1 inches
- Condition: New
- SKU: 89834-0E010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Highlander Submodels:
- Base, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS
View related parts
2005 Toyota Highlander Sensor, Air Bag, Rear
Part Number: 89833-0E010
$160.18 MSRP: $226.76
You Save: $66.58 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR, AIR BAG, RR; Air Bag Sensor
- Position: Rear Passenger Side
- Replaces: 89833-48010
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.4 x 2.8 x 2.0 inches
- Condition: New
- SKU: 89833-0E010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Highlander Submodels:
- Base, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS
View related parts
2005 Toyota Highlander Sensor, Air Bag, Front Passenger Side
Part Number: 89173-49295
$115.41 MSRP: $139.14
You Save: $23.73 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Front; Sensor, Air Bag, Front Driver Side; Air Bag Sensor
- Position: Front
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.9 x 3.0 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89173-49295
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
View related parts
2005 Toyota Highlander Side Impact Sensor, Front
Part Number: 89860-48030
$194.66 MSRP: $238.73
You Save: $44.07 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Side Air Bag; Air Bag Impact Sensor, Center, Front; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side; Sensor Assembly, Side Air Bag, Driver Side
- Manufacturer Note: SRS AIR BAG-DRIVER & PASSENGER & SIDE & CURTAIN
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89860-48030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
View related parts
2005 Toyota Highlander Rear Sensor, Driver Side
Part Number: 89834-48020
$122.54 MSRP: $173.47
You Save: $50.93 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Rear Left; Air Bag Sensor; Impact Sensor; Side Impact Sensor; Side Sensor; Sensor, Air Bag, Rear Driver Side
- Manufacturer Note: SRS AIR BAG-DRIVER & PASSENGER & SIDE & CURTAIN
- Position: Rear Driver Side
- Part Name Code: 89834
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.4 x 2.7 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89834-48020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
View related parts
2005 Toyota Highlander Sensor, Air Bag, Rear Passenger Side
Part Number: 89833-48020
$123.81 MSRP: $175.27
You Save: $51.46 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Side Air Bag; Air Bag Sensor
- Manufacturer Note: SRS AIR BAG-DRIVER & PASSENGER & SIDE & CURTAIN
- Position: Rear Passenger Side
- Part Name Code: 89833
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.5 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89833-48020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
View related parts
2005 Toyota Highlander Position Sensor, Front Driver Side
Part Number: 89178-33050
$89.76 MSRP: $125.99
You Save: $36.23 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Seat Position; Air Bag Seat Sensor Mat, Front Left; Seat Track Position Sensor, Left; Occupant Sensor; Passenger Discriminating Sensor; Discriminating Sensor; Sensor; Sensor, Seat Position Air Bag
- Position: Front Driver Side
- Part Name Code: 89178A
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.1 x 1.6 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89178-33050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, SE, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS

2005 Toyota Highlander Air Bag Sensor

Looking for affordable OEM 2005 Toyota Highlander Air Bag Sensor? Explore our comprehensive catalogue of genuine 2005 Toyota Highlander Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2005 Toyota Highlander Air Bag Sensor Parts Questions & Experts Answers

Q: How to replace the Air Bag Sensor Rear LH on 2005 Toyota Highlander?
A: The first step to replace the Air Bag Sensor Rear LH demands following restraint system service precautions and disconnecting the negative terminal of the battery. Customers should unfasten the tonneau cover assembly and deck floor box rear and rear floor finish plate together with the deck side trim box LH and deck side trim box RH and deck side trim cover LH and rope hook and deck trim side panel assembly LH. Completely remove the air bag sensor rear LH by unplugging the connector then taking out its two bolts. Always disconnect the car battery and leave it untouched for at least 90 seconds before starting any installation work. The installation process should occur when the ignition switch is off. Install the Air Bag sensor rear LH using its 2 bolts and torque the bolts to a value of 17.5 Nm (179 kgf.cm, 13 ft.lbf). The Air Bag sensor rear LH requires replacement with a new part whenever it demonstrates dropped status and combines cracking, denting, or conspicuous defects. The SRS wiring needs proper placement during installation and must stay clear from other parts for obstructions. Validation of the installation requires inspecting the parts for possible looseness by connecting the connector to the Air Bag sensor rear LH. The procedure ends by reconnecting the battery negative terminal followed by checking the SRS warning light.