How to service and repair the drive belt on 2007 Toyota Camry?

Starting the drive belt service and repair process requires removal of the front wheel RH together with the engine under cover RH and front fender apron seal RH. To extract the V-ribbed belt begin by using Special Service Tool: 09216-42010 with a 19 mm socket wrench to rotate clockwise the V-ribbed belt tensioner arm followed by belt removal. Scroll around the V-ribbed belt to check for damages from wear or cord fraying before moving on to belt replacement if any issues appear. Cracks along the side of the ribs do not require replacement yet any missing slab parts indicate the belt must be replaced. The "new belt" condition exists when the engine runs for less than five minutes whereas the "used belt" occurs when the engine runs for five minutes and over. You need Special Service Tool: 09216-42010 to loosen the tensioner arm clockwise using a 19 mm socket wrench before belt installation where proper ribbed groove placement and bottom crank pulley groove clearance should be verified. Install the front fender apron seal RH then the engine under cover RH and front wheel RH with a torque setting of 103 Nm at 1,050 kgf-cm and 76 ft. lbs.

OEM 2007 Toyota Camry Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Drive Belts found

View related parts
2007 Toyota Camry Serpentine Belt
Part Number: 90916-A2010
$39.30 MSRP: $54.71
You Save: $15.41 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, V-Ribbed; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; A/C Belt; Belt, V(For Fan & Alternator)
- Manufacturer Note: (L)
- Replaces: 99367-C2090
- Part Name Code: 16361A
- Item Weight: 0.80 Pounds
- Item Dimensions: 17.8 x 8.5 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90916-A2010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Camry Submodels:
- LE, SE, XLE | 6 Cyl 3.5 L GAS
View related parts
2007 Toyota Camry Serpentine Belt
Part Number: 90916-A2011
$39.18 MSRP: $54.55
You Save: $15.37 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, V-Ribbed; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt, V(For Fan & Alternator)
- Manufacturer Note: (L)
- Replaces: 90916-02653
- Part Name Code: 16361A
- Item Weight: 0.90 Pounds
- Item Dimensions: 17.0 x 8.2 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90916-A2011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
2007 Toyota Camry Serpentine Belt
Part Number: 99364-C1050
$17.44 MSRP: $24.27
You Save: $6.83 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, V-Ribbed; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt, V(For Fan & Alternator)
- Part Name Code: 16361A
- Item Weight: 0.60 Pounds
- Item Dimensions: 22.2 x 6.8 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 99364-C1050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Camry Submodels:
- Hybrid | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
2007 Toyota Camry Serpentine Belt
Part Number: 90916-02652
$38.83 MSRP: $54.04
You Save: $15.21 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, V-Ribbed; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt, V(For Fan & Alternator)
- Manufacturer Note: 2AZ-FE,*195,BANDO
- Part Name Code: 16361A
- Item Weight: 1.00 Pounds
- Item Dimensions: 17.1 x 4.3 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90916-02652
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS

2007 Toyota Camry Drive Belt

Looking for affordable OEM 2007 Toyota Camry Drive Belt? Explore our comprehensive catalogue of genuine 2007 Toyota Camry Drive Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota Camry Parts Questions & Experts Answers

Q: How to service and repair the drive belt on 2007 Toyota Camry?
A: Starting the drive belt service and repair process requires removal of the front wheel RH together with the engine under cover RH and front fender apron seal RH. To extract the V-ribbed belt begin by using Special Service Tool: 09216-42010 with a 19 mm socket wrench to rotate clockwise the V-ribbed belt tensioner arm followed by belt removal. Scroll around the V-ribbed belt to check for damages from wear or cord fraying before moving on to belt replacement if any issues appear. Cracks along the side of the ribs do not require replacement yet any missing slab parts indicate the belt must be replaced. The "new belt" condition exists when the engine runs for less than five minutes whereas the "used belt" occurs when the engine runs for five minutes and over. You need Special Service Tool: 09216-42010 to loosen the tensioner arm clockwise using a 19 mm socket wrench before belt installation where proper ribbed groove placement and bottom crank pulley groove clearance should be verified. Install the front fender apron seal RH then the engine under cover RH and front wheel RH with a torque setting of 103 Nm at 1,050 kgf-cm and 76 ft. lbs.