What are the methods to replace the front crankshaft seal depending on the status of the rear timing chain cover on 2006 Toyota Tundra?

The two approaches for replacing the front crankshaft seal depend on whether the rear timing chain cover stays installed or needs removal. Before removing the oil seal from the cover start by prying it out using a screwdriver while protecting both the oil pump and timing chain cover surface by wrapping the screwdriver tip with tape. Use Special Service Tool: 09226-10010 along with a hammer to drive a fresh oil seal into position until its surface reaches the timing chain cover edge before applying MP grease to the lip. A screwdriver should be used to remove the oil seal from the rear timing chain cover but the screwdriver tip should be taped to protect the crankshaft from damage. The procedure for tapping in the oil seal requires Special Service Tool: 09226-10010 together with a hammer until it reaches flush with the timing chain cover edge before adding MP grease to the new oil seal lip.

OEM 2006 Toyota Tundra Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Crankshaft Seals found

View related parts
2006 Toyota Tundra Rear Main Seal
Part Number: 90311-A0006
$53.88 MSRP: $75.00
You Save: $21.12 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Type T Oil; Engine Crankshaft Seal, Rear; Engine Crankshaft Seal Kit; Crankshaft Seal Kit; Oil Seal Set; Crankshaft Seal; Rear Seal; Seal, Engine Rear Oil; Seal
- Manufacturer Note: (L)
- Replaces: 90311-99010
- Part Name Code: 11381A
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.2 x 5.1 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90311-A0006
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Tundra Submodels:
- Base, SR, SR5 | 6 Cyl 4.0 L GAS
View related parts
2006 Toyota Tundra Rear Main Seal
Part Number: 90311-A0002
$31.42 MSRP: $43.73
You Save: $12.31 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Seal, Type T Oil; Engine Crankshaft Seal, Rear; Timing Cover Seal; Rear Seal; Seal, Engine Rear Oil
- Manufacturer Note: (L)
- Part Name Code: 11381A
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.9 x 5.1 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90311-A0002
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Tundra Submodels:
- 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2006 Toyota Tundra Oil Seal, Front
Part Number: 90311-A0005
$19.11 MSRP: $26.60
You Save: $7.49 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Type T Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Multi-Purpose Seal; Timing Cover Seal; Crankshaft Seal; Front Seal; Timing Cover Oil Seal; Engine Crankshaft Seal
- Position: Front
- Replaces: 90311-42019, 90311-42007, 90311-42037, 90311-42036
- Part Name Code: 11301C
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.3 x 4.8 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90311-A0005
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Tundra Submodels:
- 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2006 Toyota Tundra Crankshaft Seal

Looking for affordable OEM 2006 Toyota Tundra Crankshaft Seal? Explore our comprehensive catalogue of genuine 2006 Toyota Tundra Crankshaft Seal. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Toyota Tundra Crankshaft Seal Parts Q&A

Q: What are the methods to replace the front crankshaft seal depending on the status of the rear timing chain cover on 2006 Toyota Tundra?
A: The two approaches for replacing the front crankshaft seal depend on whether the rear timing chain cover stays installed or needs removal. Before removing the oil seal from the cover start by prying it out using a screwdriver while protecting both the oil pump and timing chain cover surface by wrapping the screwdriver tip with tape. Use Special Service Tool: 09226-10010 along with a hammer to drive a fresh oil seal into position until its surface reaches the timing chain cover edge before applying MP grease to the lip. A screwdriver should be used to remove the oil seal from the rear timing chain cover but the screwdriver tip should be taped to protect the crankshaft from damage. The procedure for tapping in the oil seal requires Special Service Tool: 09226-10010 together with a hammer until it reaches flush with the timing chain cover edge before adding MP grease to the new oil seal lip.

Alternate Year Models

2005 Toyota Tundra Crankshaft Seal 2007 Toyota Tundra Crankshaft Seal