OEM 2006 Toyota Tacoma Clutch Slave Cylinder

2006 Toyota Tacoma Clutch Slave Cylinder Parts Questions & Experts Answers

• Q: How to service and repair the Clutch Slave Cylinder on 2006 Toyota Tacoma?

  A: The procedure to service or repair the clutch release cylinder demands draining clutch fluid first together with the removal of the clutch release cylinder and flexible hose tube connection through Special Service Tool: 09023-00101. The clutch release cylinder assembly removal requires you to extract its two bolts followed by cylinder pullout. Cart out the push rod before you remove the boot from the cylinder body. Compressed air will help extract the piston and spring from the cylinder body as you keep all areas safe from inner damage. After removing the cap from the bleeder plug you should reinstall the release cylinder bleeder plug by torquing it to 11 Nm (110 kgf-cm, 8.0 ft. lbs.). Begin the clutch release cylinder installation procedure by fitting the bleeder plug cap onto the bleeder plug while adding the spring to the cylinder body and greasing specified areas with lithium soap base glycol followed by piston and push rod insertion into the cylinder body then boot assembly. Use Special Service Tool: 09023-00101 while connecting the clutch release cylinder assembly to the flexible hose tube by torquing it to 15 Nm (155 kgf-cm, 11 ft. lbs.). The procedure ends with filling the brake reservoir and conducting a clutch bleeding test followed by clutch fluid leakage checks while torquing the bleeder plug to 11 Nm (110 kgf-cm, 8.0 ft. lbs.).