How to service the Clutch Slave Cylinder on Toyota Tacoma?

In order to service the Clutch Slave Cylinder, un-clip the clutch line and collect any fluid. Unscrew the release cylinder bolts, and pull out the cylinder. Tear down, unbolt and take out the boot and piston. Installation Again with grease, re-assemble the boot and reverse the order of installation but remember to bleed the clutch system after installation.

How to service and repair the Clutch Slave Cylinder on Toyota Tacoma?

To service the Clutch Slave Cylinder, take apart by removing the boot and piston, with compressed air removing the piston and spring. To put back, grease the lithium soap base glycol grease on the piston and place the piston and spring back, then the boot and push rod.

OEM Toyota Tacoma Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Clutch Slave Cylinders found

View related parts
Toyota Tacoma Slave Cylinder
Part Number: 31470-43010
$66.82 MSRP: $93.80
You Save: $26.98 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Clutch Release With Bearing; Clutch Slave Cylinder
- Replaces: 31470-35130
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2004 Toyota Tacoma | Base, DLX, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS
View related parts
Toyota Tacoma Slave Cylinder
Part Number: 31470-35191
$90.17 MSRP: $126.56
You Save: $36.39 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Clutch Release With Bearing; Clutch Slave Cylinder; Cylinder Assembly, Clutch Release
- Replaces: 31470-35190
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2017 Toyota Tacoma | Base, Pre Runner, SR, SR5 | 4 Cyl 2.7 L GAS
View related parts
Toyota Tacoma Slave Cylinder
Part Number: 31470-35181
$60.66 MSRP: $85.15
You Save: $24.49 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Clutch Release With Bearing; Clutch Slave Cylinder; Cylinder Assembly, Clutch Release
- Replaces: 31470-35180
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2015 Toyota Tacoma | Base, Pre Runner, TRD Pro, X-Runner | 6 Cyl 4.0 L GAS
View related parts
Toyota Tacoma Slave Cylinder
Part Number: 31470-35120
$82.70 MSRP: $116.09
You Save: $33.39 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Clutch Release With Bearing; Clutch Slave Cylinder; Cylinder Assembly, Clutch Release
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2004 Toyota Tacoma | Base, DLX, Limited, Pre Runner, SR5, S-Runner | 6 Cyl 3.4 L GAS
View related parts
Toyota Tacoma Slave Cylinder
Part Number: 31470-35210
$60.66 MSRP: $85.15
You Save: $24.49 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Clutch Release With Bearing; Clutch Slave Cylinder; Cylinder Assembly, Clutch Release
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2016-2022 Toyota Tacoma | Limited, Nightshade, SR, SR5, Trail, TRD Off-Road, TRD Pro, TRD Sport | 6 Cyl 3.5 L GAS

Toyota Tacoma Clutch Slave Cylinder

If you're thinking about purchasing OEM parts for your Toyota Tacoma, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Tacoma Clutch Slave Cylinder at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Tacoma Clutch Slave Cylinder Parts and Q&A

Slave Cylinder
31470-43010
Q: How to service the Clutch Slave Cylinder on Toyota Tacoma?
A: In order to service the Clutch Slave Cylinder, un-clip the clutch line and collect any fluid. Unscrew the release cylinder bolts, and pull out the cylinder. Tear down, unbolt and take out the boot and piston. Installation Again with grease, re-assemble the boot and reverse the order of installation but remember to bleed the clutch system after installation.
Slave Cylinder
31470-35120
Q: How to service and repair the Clutch Slave Cylinder on Toyota Tacoma?
A: To service the Clutch Slave Cylinder, take apart by removing the boot and piston, with compressed air removing the piston and spring. To put back, grease the lithium soap base glycol grease on the piston and place the piston and spring back, then the boot and push rod.