Other Name: Air Bag Assembly, Instrument Panel; Instrument Panel Air Bag, Upper; Passenger Inflator Module; Air Bag Assembly, Instrument Panel Passenger W/O Door
Part Name Code: 73960A
Item Weight: 7.90 Pounds
Item Dimensions: 14.9 x 11.4 x 7.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73960-08040
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2006 Toyota Sienna Submodels:
CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
Other Name: Air Bag Assembly, Front Seat; Seat Air Bag, Front Right; Air Bag Assembly, Front Seat, Passenger Side
Position: Passenger Side
Part Name Code: 73910A
Condition: New
Fitment Type: Direct Replacement
SKU: 73910-AE031
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2006 Toyota Sienna Submodels:
LE | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
2006 Toyota Sienna Air Bag
Looking for affordable OEM 2006 Toyota Sienna Air Bag? Explore our comprehensive catalogue of genuine 2006 Toyota Sienna Air Bag. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2006 Toyota Sienna Parts Questions & Experts Answers
Q: What are the essential service procedures for handling Air Bag systems on 2006 Toyota Sienna?
A: These vehicle systems must be serviced according to specific procedures to avoid Air Bag errors or malfunctions in the Supplemental Restraint System (SRS) which includes driver Air Bag along with front passenger Air Bag and side Air Bag and curtain shield Air Bag and front seat belt pretensioner. The SRS system possesses Back Up power so service operations must wait for 90 seconds after switching to "LOCK" position and battery negative (-) terminal removal. The SRS components which include the steering pad and front passenger Air Bag assembly as well as the center Air Bag sensor assembly and front Air Bag sensor and front seat inner belt assembly and seat position sensor and occupant classification ECU and front seat side Air Bag assembly and side Air Bag sensor and curtain shield Air Bag assembly and rear Air Bag sensor and front seat outer belt assembly must never face hot air or flames. Perform a DTC inspection before disconnecting the vehicle battery while executing troubleshooting operations and conduct a basic check of relevant components when facing minor vehicle collisions. You must detach the Air Bag sensor before starting any operation that could harm it and you should always select new SRS parts instead of secondary ones. All repairs and parts disassembly work on SRS components must stay prohibited and each defective or damaged part requires installation of new replacement items. High impedance (10 k/V minimum) voltage and ohm meters should be used during electrical circuit diagnosis while following the safety warnings found on SRS component information labels. Checking the SRS warning light after work completion is important but disconnecting the negative terminal cable erases system memory so take notes of stored contents before disconnecting and restore all settings after the work is finished. Before performing service on vehicles equipped with mobile communication systems always follow the required service precautions. The procedure for Air Bag sensor handling requires waiting for at least 90 seconds after disconnecting the negative (-) terminal cable before performing sensor replacements or curtain shield Air Bag door adjustments. Additionally install sensors before connector operations then avoid using dropped sensors while maintaining the sensor's original condition.