How to service the Crankshaft Position Sensor on 2006 Toyota Sequoia?

Start the servicing of the Crankshaft Position Sensor by removing Engine Under Cover No.1. The first step should be to disconnect the crankshaft position sensor connector while removing its bolt so you can extract the crankshaft position sensor. Position the crankshaft position sensor on its mounting place then fasten it with the bolt while following a torque specification of 6.5 N.m (65 kgf.cm, 58 in.lbf). The Crankshaft Position Sensor connector should be reconnected before reinstallation of Engine Under Cover No.1.

OEM 2006 Toyota Sequoia Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2006 Toyota Sequoia Sensor, Crank Position
Part Number: 90919-A5001
$119.49 MSRP: $169.15
You Save: $49.66 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Crankshaft Position Sensor; Crankshaft Position Sensor
- Manufacturer Note: (L)
- Replaces: 90919-05035
- Part Name Code: 15100R
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.6 x 2.9 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90919-A5001
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2006 Toyota Sequoia Crankshaft Position Sensor

Looking for affordable OEM 2006 Toyota Sequoia Crankshaft Position Sensor? Explore our comprehensive catalogue of genuine 2006 Toyota Sequoia Crankshaft Position Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Toyota Sequoia Parts Questions & Experts Answers

Q: How to service the Crankshaft Position Sensor on 2006 Toyota Sequoia?
A: Start the servicing of the Crankshaft Position Sensor by removing Engine Under Cover No.1. The first step should be to disconnect the crankshaft position sensor connector while removing its bolt so you can extract the crankshaft position sensor. Position the crankshaft position sensor on its mounting place then fasten it with the bolt while following a torque specification of 6.5 N.m (65 kgf.cm, 58 in.lbf). The Crankshaft Position Sensor connector should be reconnected before reinstallation of Engine Under Cover No.1.