How to service the Crankshaft Position Sensor on 2005 Toyota Sequoia?

Service of the Crankshaft Position Sensor begins by removing the engine under cover. Remove the crankshaft position sensor by disconnecting its connector along with using a bolt to detach it. Install the cranksHeft position sensor by positioning it correctly then secure it with the bolt using 6.5 N.m torque value (65 kgf.cm or 58 in.lbf.). The service completion requires installing the engine under cover afterward you reconnect the crankshaft position sensor connector.

OEM 2005 Toyota Sequoia Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2005 Toyota Sequoia Sensor, Crank Position
Part Number: 90919-A5001
$119.49 MSRP: $169.15
You Save: $49.66 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Crankshaft Position Sensor; Crankshaft Position Sensor
- Manufacturer Note: (L)
- Replaces: 90919-05035
- Part Name Code: 15100R
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.6 x 2.9 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90919-A5001
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2005 Toyota Sequoia Crankshaft Position Sensor

Looking for affordable OEM 2005 Toyota Sequoia Crankshaft Position Sensor? Explore our comprehensive catalogue of genuine 2005 Toyota Sequoia Crankshaft Position Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2005 Toyota Sequoia Parts Questions & Experts Answers

Q: How to service the Crankshaft Position Sensor on 2005 Toyota Sequoia?
A: Service of the Crankshaft Position Sensor begins by removing the engine under cover. Remove the crankshaft position sensor by disconnecting its connector along with using a bolt to detach it. Install the cranksHeft position sensor by positioning it correctly then secure it with the bolt using 6.5 N.m torque value (65 kgf.cm or 58 in.lbf.). The service completion requires installing the engine under cover afterward you reconnect the crankshaft position sensor connector.