×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2005 Toyota Sequoia Knock Sensor
Engine Knock Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Knock Sensor found
2005 Toyota Sequoia Knock Sensor
Part Number: 89615-06010$138.05 MSRP: $195.42You Save: $57.37 (30%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Sensor, Knock Control; Ignition Knock (Detonation) Sensor
- Replaces: 89615-BZ030, 89615-20090, 89615-BZ040
- Part Name Code: 89615
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.1 x 1.9 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89615-06010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2005 Toyota Sequoia Knock Sensor
Looking for affordable OEM 2005 Toyota Sequoia Knock Sensor? Explore our comprehensive catalogue of genuine 2005 Toyota Sequoia Knock Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2005 Toyota Sequoia Knock Sensor Parts Q&A
- Q: How to service and repair the knock sensor on 2005 Toyota Sequoia?A: A visor with two manifolds and an air connector requires removal before servicing knock sensors. Check the resistance between knock sensor terminals using an ohmmeter after disconnected connector wires because proper measurement should fall between 120 to 280 kOhm at ambient temperature of 20 degrees Celsius (68 degrees Fahrenheit). The sensor needs replacement when the resistance reading rests outside of this specified range. The installation process starts by disconnecting the two knock sensor connectors followed by removing the two nuts which enables appropriate removal of the two knock sensors. Sensors can be installed with the two nuts according to 20 N.m torque requirements (204 kgf.cm, 15 ft.lbf) followed by connecting the two knock sensor connectors. To complete the repair process reinstall the throttle body cover together with the intake air connector as well as the intake manifold assembly.