How to service and repair the Brake Master Cylinder on 2006 Toyota Sequoia?

You must start Brake Master Cylinder servicing by unfastening the Brake Master Cylinder Reservoir Sub-Assembly set screw then extracting the reservoir while applying torque pressure up to 1.5 Nm (15 kgf-cm, 13 ft. lbs.). Then you must remove the cap and strainer from the reservoir before taking off the Master Cylinder Reservoir Grommet and the Brake Master Cylinder Gasket. The Master Cylinder Pressure Sensors need to be removed using a torque of 25 Nm (250 kgf-cm, 18 ft. lbs.). The reassembly process needs you to perform steps in the opposite order of disassembly steps while applying lithium soap base glycol grease to rubber parts that have arrows for reference.

OEM 2006 Toyota Sequoia Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Master Cylinder found

View related parts
2006 Toyota Sequoia Master Cylinder
Part Number: 47201-0C041
$478.05 MSRP: $700.59
You Save: $222.54 (32%)
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir; Cylinder Sub-Assembly, Brake Master
- Replaces: 47201-0C040
- Part Name Code: 47201
- Item Weight: 2.40 Pounds
- Item Dimensions: 10.3 x 10.2 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47201-0C041
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2006 Toyota Sequoia Brake Master Cylinder

Looking for affordable OEM 2006 Toyota Sequoia Brake Master Cylinder? Explore our comprehensive catalogue of genuine 2006 Toyota Sequoia Brake Master Cylinder. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Toyota Sequoia Parts Questions & Experts Answers

Q: How to service and repair the Brake Master Cylinder on 2006 Toyota Sequoia?
A: You must start Brake Master Cylinder servicing by unfastening the Brake Master Cylinder Reservoir Sub-Assembly set screw then extracting the reservoir while applying torque pressure up to 1.5 Nm (15 kgf-cm, 13 ft. lbs.). Then you must remove the cap and strainer from the reservoir before taking off the Master Cylinder Reservoir Grommet and the Brake Master Cylinder Gasket. The Master Cylinder Pressure Sensors need to be removed using a torque of 25 Nm (250 kgf-cm, 18 ft. lbs.). The reassembly process needs you to perform steps in the opposite order of disassembly steps while applying lithium soap base glycol grease to rubber parts that have arrows for reference.