How to service and repair the front lower ball joint on 2006 Toyota RAV4?

When servicing the front lower ball joint, dismantle the front wheel, the speed sensor, brake cylinder, disc and the axle hub nut. Unscrew the suspension arm and tie rod and remove the steering knuckle and ball joint. Check, re-fit and tighten parts, making sure they are correctly aligned.

OEM 2006 Toyota RAV4 Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ball Joint found

View related parts
2006 Toyota RAV4 Joint Assembly, Lower Ball, Front Passenger Side
Part Number: 43330-09720
$62.91 MSRP: $88.31
You Save: $25.40 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Set, Lower Ball; Joint Assembly, Lower Ball, Front Driver Side; Suspension Ball Joint; Ball Joint
- Position: Lower
- Item Weight: 1.50 Pounds
- Item Dimensions: 5.5 x 3.5 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43330-09720
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota RAV4 Submodels:
- Adventure, Base, Hybrid Limited, Hybrid SE, Hybrid XLE, LE, Limited, Platinum, SE, Sport, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS

2006 Toyota RAV4 Ball Joint

Looking for affordable OEM 2006 Toyota RAV4 Ball Joint? Explore our comprehensive catalogue of genuine 2006 Toyota RAV4 Ball Joint. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Toyota RAV4 Ball Joint Parts Q&A

Q: How to service and repair the front lower ball joint on 2006 Toyota RAV4?
A: When servicing the front lower ball joint, dismantle the front wheel, the speed sensor, brake cylinder, disc and the axle hub nut. Unscrew the suspension arm and tie rod and remove the steering knuckle and ball joint. Check, re-fit and tighten parts, making sure they are correctly aligned.