Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2006 Toyota Highlander Submodels:
Base, Hybrid, Hybrid Limited, Limited, Sport | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
2006 Toyota Highlander Oil Filter
Looking for affordable OEM 2006 Toyota Highlander Oil Filter? Explore our comprehensive catalogue of genuine 2006 Toyota Highlander Oil Filter. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2006 Toyota Highlander Parts Questions & Experts Answers
Q: How to replace the oil filter on 2006 Toyota Highlander?
A: Start this replacement process by putting on protective clothing together with gloves because mineral oil can trigger dermatitis as well as skin irritation but keep in mind that engine oil loaded with dangerous substances exists in the spent oil. Open the oil drain plug while you remove the oil filler cap before allowing the oil to collect in a suitable container. The process begins with oil filter sub-assembly removal through the use of Special Service Tool: 09228-06501. Before installing the oil filter check its surface first and wipe the new filter gasket with clean engine oil before hand-tightening the filter onto its seat until the gasket touches the base. Tighten the oil filter using Special Service Tool: 09228-06501. Wait to apply 17.5 Nm (178 kgf-cm, 13 ft. lbs.) torque only if enough space allows. Otherwise apply a 3/4 turn by hand. The maintenance process includes cleaning and installing the oil drain plug with its new gasket before torquing it to 25 Nm (255 kgf-cm, 18 ft. lbs.) while filling with fresh oil to specifications and finishing with the oil filler cap installation. Check for engine oil leaks before sending used oil filters to appropriate disposal areas to defend the environment.