OEM 2005 Toyota Highlander Oil Filter

2005 Toyota Highlander Parts Questions & Experts Answers

• Q: How to replace the oil filter safely and correctly on 2005 Toyota Highlander?

  A: Workers should handle the oil filter replacement with caution since continuous exposure to mineral oil can cause dry skin and dermatitis and engine oil might contain dangerous pollutants. Wear protective clothing along with gloves during your task then wash your skin thoroughly with soap and water or use a water-less hand cleaner to remove used engine oil; do not touch this oil with gasoline or thinners or solvents. The proper disposal area for used oil and filters exists for specific locations. To start the procedure begin by draining engine oil through removing the oil drain plug followed by the oil filler cap and directing the oil fluid into a collection container. To begin the process you should remove the oil filter sub-assembly with Special Service Tool: 09228-06501. To install the new oil filter begin by cleaning the installation surface along with applying clean engine oil to the gasket and gently screwing it into place until the gasket touches the seat. Similar to the previous step, employ Special Service Tool: 09228-06501 to finish installation. The tool requires an additional 3/4-turn torque. Introduce a new drain plug gasket before filling the engine with fresh oil using specified capacity measurements of 3.8 liters for changing the oil filter and 3.6 liters without filter replacement or 4.5 liters for dry fill operations. To complete the task install the oil filler cap then check for any oil leakage.