Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following 2006 Toyota Corolla Submodels:
50th Anniversary Special Edition, Base, CE, DLX, DLX All Trac, DX, FX, FX16, FX16 GTS, GTS, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, LE Eco, LE Limited, Nightshade, S, SE, SE Apex, SE Nightshade, Special Edition, Sport DLX, Sport GTS, Sport SR5, SR5, SR5 All Trac, VE, XLE, XRS, XSE, XSE Apex | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2006 Toyota Corolla Submodels:
Base, DLX, DLX All Trac, FX16, FX16 GTS, GTS, LE, LE Limited, Sport DLX, SR5, SR5 All Trac, XRS | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
2006 Toyota Corolla Oil Filter
Looking for affordable OEM 2006 Toyota Corolla Oil Filter? Explore our comprehensive catalogue of genuine 2006 Toyota Corolla Oil Filter. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2006 Toyota Corolla Parts Questions & Experts Answers
Q: How to replace the oil filter sub-assembly on 2006 Toyota Corolla?
A: The oil filter sub-assembly (1ZZ-FE) replacement begins with removing the engine under cover from the right-hand side to drain the engine oil through the oil filler cap followed by the oil drain plug while directing the oil into a suitable receptacle. The clean oil drain plug installation requires a new gasket before torquing it to 37 Nm (377 kgf-cm, 27 ft. lbs.). Special Service Tool: 09228-06501 enables the removal of the oil filter sub-assembly. After you obtain your new oil filter you should start by cleaning the installation base and then apply engine oil to the new oil filter gasket. To install the oil filter use Special Service Tool: 09228-06501 to turn it 3/4 additional times beyond when the gasket makes contact with its seat while maintaining a reference torque at 13 Nm (133 kgf-cm, 10 ft. lbs.). The fresh oil should be added to the engine according to three specified volumes: 4.2 L (4.4 US qts., 3.7 Imp. qts.) for a drain and refill with an oil filter change while the capacity is 4.0 L (4.2 US qts., 3.5 Imp. qts.) for a drain and refill without an oil filter change and 4.7 L (5.0 US qts., 4.1 Imp. qts.) for a dry fill. Examine the engine for potential oil leakage as the last step.