How to Service and Repair the Front Speed Sensor on 2006 Toyota Avalon?

The replacement of the Front Speed Sensor LH needs front wheel and front fender liner LH removal. Remove the 2 bolts to sever the speed sensor harness connection between the body and shock absorber assembly after disconnecting the speed sensor connector and clamp. You need to first uninstall the clamp beyond the steering knuckle and then eliminate the bolt which has the purpose to detach the speed sensor front LH. After every sensor removal the installation hole and surface need to be cleaned before the task of ensuring no foreign particles remain on the sensor tip. The speed sensor front LH installation requires attaching the bolt followed by torque application to 8.0 Nm (82 kgf-cm, 71 inch lbs.). There are two bolts for attaching the sensor harness brackets to the body and shock absorber assembly. Torque Bolt A to 5.0 Nm (51 kgf-cm, 44 inch lbs.) and Bolt B to 19 Nm (192 kgf-cm, 14 ft. lbs.). The clamp should be attached to the steering knuckle without wire harness twisting during installation and then the speed sensor connector can be connected together with the clamp. Reinstall the front fender liner LH and front wheel after torquing the wheel to 103 Nm which equals (1,050 kgf-cm, 76 ft. lbs.) and verify the ABS speed sensor signal.

OEM 2006 Toyota Avalon Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Speed Sensors found

View related parts
2006 Toyota Avalon Sensor, Transmission Revolution
Part Number: 89413-48010
$118.43 MSRP: $144.01
You Save: $25.58 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Transmission; Sensor, Speed; Vehicle Speed Sensor
- Replaces: 89413-33010, 89413-08010
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.7 x 2.6 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89413-48010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Avalon Submodels:
- Limited, Touring, XL, XLS | 6 Cyl 3.5 L GAS
View related parts
2006 Toyota Avalon ABS Sensor, Rear
Part Number: 89544-48010
$182.66 MSRP: $224.01
You Save: $41.35 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Skid Control; ABS Wheel Speed Sensor Tone Ring, Rear; Rear Right/Left Sensor; Rear Speed Sensor; Sensor Ring; ABS Rotor; Sensor; ABS Wheel Speed Sensor
- Position: Rear
- Replaces: 89544-48020, 89544-06020, 89544-06010
- Part Name Code: 89544
- Item Weight: 0.80 Pounds
- Item Dimensions: 10.4 x 6.4 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89544-48010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Avalon Submodels:
- Base, Limited, Touring, XL, XLS | 6 Cyl 3.5 L GAS
View related parts
2006 Toyota Avalon ABS Sensor, Front Driver Side
Part Number: 89543-07030
$238.00 MSRP: $339.81
You Save: $101.81 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Left-Hand; ABS Wheel Speed Sensor, Front Left; Front Speed Sensor; ABS Sensor Wire; Sensor, Speed, Front Driver Side; ABS Wheel Speed Sensor
- Position: Front Driver Side
- Part Name Code: 89543
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.4 x 6.5 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89543-07030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Avalon Submodels:
- Base, Limited, Touring, XL, XLS | 6 Cyl 3.5 L GAS
View related parts
2006 Toyota Avalon ABS Sensor, Front Passenger Side
Part Number: 89542-07030
$238.00 MSRP: $339.81
You Save: $101.81 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Right-Hand; ABS Wheel Speed Sensor, Front Right; Front Speed Sensor; ABS Sensor Wire; Sensor, Speed, Front Passenger Side; ABS Wheel Speed Sensor
- Position: Front Passenger Side
- Part Name Code: 89542
- Item Weight: 0.80 Pounds
- Item Dimensions: 15.2 x 5.1 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89542-07030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota Avalon Submodels:
- Base, Limited, Touring, XL, XLS | 6 Cyl 3.5 L GAS

2006 Toyota Avalon Speed Sensor

Looking for affordable OEM 2006 Toyota Avalon Speed Sensor? Explore our comprehensive catalogue of genuine 2006 Toyota Avalon Speed Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Toyota Avalon Parts Questions & Experts Answers

Q: How to Service and Repair the Front Speed Sensor on 2006 Toyota Avalon?
A: The replacement of the Front Speed Sensor LH needs front wheel and front fender liner LH removal. Remove the 2 bolts to sever the speed sensor harness connection between the body and shock absorber assembly after disconnecting the speed sensor connector and clamp. You need to first uninstall the clamp beyond the steering knuckle and then eliminate the bolt which has the purpose to detach the speed sensor front LH. After every sensor removal the installation hole and surface need to be cleaned before the task of ensuring no foreign particles remain on the sensor tip. The speed sensor front LH installation requires attaching the bolt followed by torque application to 8.0 Nm (82 kgf-cm, 71 inch lbs.). There are two bolts for attaching the sensor harness brackets to the body and shock absorber assembly. Torque Bolt A to 5.0 Nm (51 kgf-cm, 44 inch lbs.) and Bolt B to 19 Nm (192 kgf-cm, 14 ft. lbs.). The clamp should be attached to the steering knuckle without wire harness twisting during installation and then the speed sensor connector can be connected together with the clamp. Reinstall the front fender liner LH and front wheel after torquing the wheel to 103 Nm which equals (1,050 kgf-cm, 76 ft. lbs.) and verify the ABS speed sensor signal.