How to replace the Transmission Speed Sensor on 2005 Toyota Avalon?

The first step to replace the Transmission Speed Sensor is disconnecting the cable from the negative battery terminal. The maintenance process first requires removal of the air cleaner assembly together with air cleaner hose No.1, air cleaner bracket and air cleaner inlet No.1. To access the NT sensor remove both the bolt and the transmission revolution sensor following the disconnection of its speed sensor connector. Disconnection of the speed sensor connector along with bolt removal of the transmission revolution sensor applies to the NC sensor installation. The procedure includes applying ATF coating on the O-ring before installing the speed sensor with its bolt and torquing to 11 Nm (115 kgf-cm, 8 ft. lbs.) while ensuring correct manufacturer information on the label before connecting the speed sensor connector. Apply this procedure once again for the installation of the NT sensor. When putting both sensors into place finish the process by reattaching the air cleaner inlet No.1 followed by the air cleaner bracket and the air cleaner hose No.1 then the air cleaner assembly. After disconnecting the cable from the negative battery terminal you should reestablish its connection then run the initialization process because many systems need this procedure.

OEM 2005 Toyota Avalon Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Speed Sensors found

View related parts
2005 Toyota Avalon Sensor, Transmission Revolution
Part Number: 89413-48010
$118.43 MSRP: $144.01
You Save: $25.58 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Transmission; Sensor, Speed; Vehicle Speed Sensor
- Replaces: 89413-33010, 89413-08010
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.7 x 2.6 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89413-48010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Avalon Submodels:
- Limited, Touring, XL, XLS | 6 Cyl 3.5 L GAS
View related parts
2005 Toyota Avalon ABS Sensor, Rear
Part Number: 89544-48010
$182.66 MSRP: $224.01
You Save: $41.35 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Skid Control; ABS Wheel Speed Sensor Tone Ring, Rear; Rear Right/Left Sensor; Rear Speed Sensor; Sensor Ring; ABS Rotor; Sensor; ABS Wheel Speed Sensor
- Position: Rear
- Replaces: 89544-48020, 89544-06020, 89544-06010
- Part Name Code: 89544
- Item Weight: 0.80 Pounds
- Item Dimensions: 10.4 x 6.4 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89544-48010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Avalon Submodels:
- Base, Limited, Touring, XL, XLS | 6 Cyl 3.5 L GAS
View related parts
2005 Toyota Avalon ABS Sensor, Front Driver Side
Part Number: 89543-07030
$238.00 MSRP: $339.81
You Save: $101.81 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Left-Hand; ABS Wheel Speed Sensor, Front Left; Front Speed Sensor; ABS Sensor Wire; Sensor, Speed, Front Driver Side; ABS Wheel Speed Sensor
- Position: Front Driver Side
- Part Name Code: 89543
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.4 x 6.5 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89543-07030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Avalon Submodels:
- Base, Limited, Touring, XL, XLS | 6 Cyl 3.5 L GAS
View related parts
2005 Toyota Avalon ABS Sensor, Front Passenger Side
Part Number: 89542-07030
$238.00 MSRP: $339.81
You Save: $101.81 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Right-Hand; ABS Wheel Speed Sensor, Front Right; Front Speed Sensor; ABS Sensor Wire; Sensor, Speed, Front Passenger Side; ABS Wheel Speed Sensor
- Position: Front Passenger Side
- Part Name Code: 89542
- Item Weight: 0.80 Pounds
- Item Dimensions: 15.2 x 5.1 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89542-07030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Avalon Submodels:
- Base, Limited, Touring, XL, XLS | 6 Cyl 3.5 L GAS

2005 Toyota Avalon Speed Sensor

Looking for affordable OEM 2005 Toyota Avalon Speed Sensor? Explore our comprehensive catalogue of genuine 2005 Toyota Avalon Speed Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2005 Toyota Avalon Parts Questions & Experts Answers

Q: How to replace the Transmission Speed Sensor on 2005 Toyota Avalon?
A: The first step to replace the Transmission Speed Sensor is disconnecting the cable from the negative battery terminal. The maintenance process first requires removal of the air cleaner assembly together with air cleaner hose No.1, air cleaner bracket and air cleaner inlet No.1. To access the NT sensor remove both the bolt and the transmission revolution sensor following the disconnection of its speed sensor connector. Disconnection of the speed sensor connector along with bolt removal of the transmission revolution sensor applies to the NC sensor installation. The procedure includes applying ATF coating on the O-ring before installing the speed sensor with its bolt and torquing to 11 Nm (115 kgf-cm, 8 ft. lbs.) while ensuring correct manufacturer information on the label before connecting the speed sensor connector. Apply this procedure once again for the installation of the NT sensor. When putting both sensors into place finish the process by reattaching the air cleaner inlet No.1 followed by the air cleaner bracket and the air cleaner hose No.1 then the air cleaner assembly. After disconnecting the cable from the negative battery terminal you should reestablish its connection then run the initialization process because many systems need this procedure.