How to overhaul the front shock absorber with coil spring on 2006 Toyota 4Runner?

The front disc wheel should be removed first during front shock absorber with coil spring overhaul while using a hexagon (6 mm) wrench to disconnect links from steering knuckles at both left and right stabilizer link assemblies. The process begins with removing front stabilizer brackets and the stabilizer bar followed by front shock absorber with coil spring extraction which requires all components including bolt, nut and washer together with three upper nuts to be taken out. You must raise the vehicle while adopting shock absorber stretching before disconnecting the tube for REAS models and afterward removing their specified bolts and nuts. The front shock absorber cushion retainer and cushion removal requires the use of Special Service Tool: 09727-30021 (09727-00010, 09727-00031), 09727-00060 which compresses the coil spring. The shock absorber assembly demands a complete inspection for abnormal conditions and requires replacement if present. The installation of the new absorber bush requires Special Service Tool: 09710-22021 (09710-01071, 09710-01081) and a press to make the necessary attachment. The process continues with the front coil spring and correct alignment procedures. The shock absorber cushion retainer and suspension support sub-assembly along with cushion should be installed before tightening the support nut to 25 Nm (260 kgf-cm) torque (18 ft. lbs.). Put the coil spring lower end towards the vehicle's rear during temporary shock absorber wiring before locking all parts at the specified torque requirements. End the installation process by putting on the stabilizer bar alongside the brackets while reattaching the link assemblies. Afterward restore the front disc wheel and check all connections for stability before examining the alignment of front wheels. Dispose of the shock absorber assembly safely by extending the piston rod followed by making a gas discharge hole while lowering the pressure with caution against flying debris.

OEM 2006 Toyota 4Runner Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Shock Absorbers found

View related parts
2006 Toyota 4Runner Shock Absorber
Part Number: 48510-69675
$154.15 MSRP: $218.22
You Save: $64.07 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Suspension Shock Absorber; Shock; Strut
- Replaces: 48510-80269, 48510-80086, 48510-80533, 48510-80329, 48510-80270, 48510-69525, 48510-69555, 48510-80087, 48510-80328
- Item Weight: 5.70 Pounds
- Item Dimensions: 26.6 x 8.5 x 7.7 inches
- Condition: New
- SKU: 48510-69675
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2006 Toyota 4Runner Shock Absorber
Part Number: 48530-80371
$63.15 MSRP: $88.64
You Save: $25.49 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Rear Shock Absorber; Suspension Kit; Strut Assembly; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48530-35072
- Replaces: 48530-80299, 48530-80087
- Item Weight: 1.40 Pounds
- Item Dimensions: 25.6 x 6.6 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-80371
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2006 Toyota 4Runner Shock Absorber
Part Number: 48530-80372
$61.96 MSRP: $86.97
You Save: $25.01 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Rear Shock Absorber; Suspension Kit; Strut Assembly; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48530-35082
- Replaces: 48530-80300, 48530-80088
- Item Weight: 1.40 Pounds
- Item Dimensions: 26.4 x 6.8 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-80372
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2006 Toyota 4Runner Shock Absorber, Front Passenger Side
Part Number: 48510-80230
$225.17 MSRP: $321.50
You Save: $96.33 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Front Right-Hand; Suspension Shock/Strut Kit; Complete Strut; Strut; Absorber Assembly, Shock, Front Passenger Side
- Position: Front Passenger Side
- Replaces: 48510-80089
- Part Name Code: 48510
- Item Weight: 9.60 Pounds
- Item Dimensions: 27.1 x 8.5 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-80230
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2006 Toyota 4Runner Shock Absorber, Front Passenger Side
Part Number: 48510-80229
$225.17 MSRP: $321.50
You Save: $96.33 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Front Right-Hand; Suspension Shock/Strut Kit; Complete Strut; Absorber Assembly, Shock, Front Passenger Side
- Position: Front Passenger Side
- Replaces: 48510-80088
- Part Name Code: 48510
- Item Weight: 9.30 Pounds
- Item Dimensions: 26.4 x 8.5 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-80229
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2006 Toyota 4Runner Shock Absorber, Front Driver Side
Part Number: 48520-39885
$218.78 MSRP: $312.36
You Save: $93.58 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Front Left-Hand; Suspension Shock/Strut Kit; Complete Strut; Strut; Absorber Assembly, Shock, Front Driver Side
- Position: Front Driver Side
- Replaces: 48520-39535
- Part Name Code: 48520
- Item Weight: 9.70 Pounds
- Item Dimensions: 27.1 x 8.4 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48520-39885
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2006 Toyota 4Runner Shock Absorber, Rear Driver Side
Part Number: 48540-39445
$400.08 MSRP: $586.32
You Save: $186.24 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Left Shock Absorber; Suspension Kit; Strut Assembly; Shock Set; Strut Kit.; Absorber Assembly, Shock, Rear Driver Side
- Position: Rear Driver Side
- Part Name Code: 48540
- Item Weight: 7.40 Pounds
- Item Dimensions: 26.4 x 6.6 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48540-39445
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2006 Toyota 4Runner Shock Absorber, Rear Driver Side
Part Number: 48540-39455
$385.66 MSRP: $565.19
You Save: $179.53 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Left Shock Absorber; Suspension Kit; Strut Assembly; Shock Set; Strut Kit.; Shock; Absorber Assembly, Shock, Rear Driver Side
- Position: Rear Driver Side
- Part Name Code: 48540
- Item Weight: 6.90 Pounds
- Item Dimensions: 25.6 x 6.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48540-39455
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2006 Toyota 4Runner Shock Absorber, Rear Passenger Side
Part Number: 48530-80089
$396.56 MSRP: $581.16
You Save: $184.60 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Right Shock Absorber; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Shock; Absorber Assembly, Shock, Rear Passenger Side
- Position: Rear Passenger Side
- Part Name Code: 48530
- Item Weight: 6.50 Pounds
- Item Dimensions: 26.4 x 6.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-80089
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2006 Toyota 4Runner Shock Absorber, Front Driver Side
Part Number: 48520-39875
$218.78 MSRP: $312.36
You Save: $93.58 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Front Left-Hand; Suspension Shock/Strut Kit; Complete Strut; Absorber Assembly, Shock, Front Driver Side
- Position: Front Driver Side
- Replaces: 48520-39525
- Part Name Code: 48520
- Item Weight: 10.00 Pounds
- Item Dimensions: 26.9 x 8.4 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48520-39875
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2006 Toyota 4Runner Shock Absorber, Rear Passenger Side
Part Number: 48530-80090
Product Specifications
- Other Name: Absorber Assembly, Shock; Rear Right Shock Absorber; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Shock; Absorber Assembly, Shock, Rear Passenger Side
- Position: Rear Passenger Side
- Part Name Code: 48530
- Item Weight: 7.10 Pounds
- Item Dimensions: 26.1 x 6.8 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-80090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2006 Toyota 4Runner Shock Absorber

Looking for affordable OEM 2006 Toyota 4Runner Shock Absorber? Explore our comprehensive catalogue of genuine 2006 Toyota 4Runner Shock Absorber. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Toyota 4Runner Parts Questions & Experts Answers

Q: How to overhaul the front shock absorber with coil spring on 2006 Toyota 4Runner?
A: The front disc wheel should be removed first during front shock absorber with coil spring overhaul while using a hexagon (6 mm) wrench to disconnect links from steering knuckles at both left and right stabilizer link assemblies. The process begins with removing front stabilizer brackets and the stabilizer bar followed by front shock absorber with coil spring extraction which requires all components including bolt, nut and washer together with three upper nuts to be taken out. You must raise the vehicle while adopting shock absorber stretching before disconnecting the tube for REAS models and afterward removing their specified bolts and nuts. The front shock absorber cushion retainer and cushion removal requires the use of Special Service Tool: 09727-30021 (09727-00010, 09727-00031), 09727-00060 which compresses the coil spring. The shock absorber assembly demands a complete inspection for abnormal conditions and requires replacement if present. The installation of the new absorber bush requires Special Service Tool: 09710-22021 (09710-01071, 09710-01081) and a press to make the necessary attachment. The process continues with the front coil spring and correct alignment procedures. The shock absorber cushion retainer and suspension support sub-assembly along with cushion should be installed before tightening the support nut to 25 Nm (260 kgf-cm) torque (18 ft. lbs.). Put the coil spring lower end towards the vehicle's rear during temporary shock absorber wiring before locking all parts at the specified torque requirements. End the installation process by putting on the stabilizer bar alongside the brackets while reattaching the link assemblies. Afterward restore the front disc wheel and check all connections for stability before examining the alignment of front wheels. Dispose of the shock absorber assembly safely by extending the piston rod followed by making a gas discharge hole while lowering the pressure with caution against flying debris.

Related 2006 Toyota 4Runner Parts

Alternate Year Models

2005 Toyota 4Runner Shock Absorber 2007 Toyota 4Runner Shock Absorber