How to remove and install the right-hand side seat belt assembly on 2006 Scion xB?

The first step to remove the right-hand side seat belt assembly involves disconnecting the negative battery cable to avoid activating the Air Bag and seat belt pretensioner system for at least 90 seconds. Then, remove the front door scuff plate RH, cowl side trim board RH, front door opening trim Weather Strip RH, rear door scuff plate RH, rear door opening trim Weather Strip RH, center pillar garnish lower RH, and the front seat outer belt assembly RH by following these steps: remove the floor anchor cover, the bolt and outer belt on the floor anchor side, the shoulder anchor cover, the bolt and outer belt on the shoulder anchor side, disconnect the pretensioner connector, and remove the 2 bolts on the retractor side to completely remove the outer belt. To proceed, first disassemble the front shoulder belt anchor adjuster assembly by uninstalling its 2 bolts along with anchor adjuster from the center pillar garnish upper RH. To install the front shoulder belt anchor adjuster assembly first secure its 2 bolts with a torque of 42 N.m (428 kgf.cm, 31 ft.lbf). The first step should be to install the center pillar garnish upper RH before adding the front seat outer belt assembly RH with correct placement of its retractor side bolts that require 5.0 N.m (51 kgf.cm, 44 in.lbf) torques for upper bolts and 42 N.m (428 kgf.cm, 31 ft.lbf) torques for lower bolts. Installation requires connecting the pretensioner connector followed by placing the external belt onto the shoulder anchor side bolt (torque 42 N.m (428 kgf.cm, 31 ft.lbf) then installing the shoulder anchor cover and the outer belt with floor anchor side bolt (torque 42 N.m (428 kgf.cm, 31 ft.lbf)) Check the fastener operation of the child seat system after installation of floor anchor covers while verifying that the belt remains locked when removing it quickly. The replacement of the belt should happen in case it fails to operate according to specifications. Conclude the installation process by reinstalling the center pillar garnish lower RH together with the rear door opening trim Weather Strip RH, rear door scuff plate RH, front door opening trim Weather Strip RH, cowl side trim board RH, front door scuff plate RH and restoring the connection of the cable to the negative battery terminal.

OEM 2006 Scion xB Seat Belt

Seat Safety Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Seat Belts found

View related parts
2006 Scion xB Buckle, Driver Side
Part Number: 73480-52190-C0
$40.62 MSRP: $56.54
You Save: $15.92 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Rear Seat I; Seat Belt Receptacle, Rear Left; Latch; Belt Assembly, Rear Seat Inner W/Center, Driver Side
- Manufacturer Note: BLACK,TRIM9#
- Position: Driver Side
- Part Name Code: 73480
- Item Weight: 1.10 Pounds
- Item Dimensions: 13.9 x 10.3 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73480-52190-C0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Scion xB Submodels:
- Base | 4 Cyl 1.5 L GAS
View related parts
2006 Scion xB Buckle, Black, Passenger Side
Part Number: 73470-52170-C0
$40.62 MSRP: $56.54
You Save: $15.92 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Rear Seat I; Seat Belt Receptacle, Rear Right; Latch; Belt Assembly, Rear Seat Inner W/Center, Passenger Side
- Manufacturer Note: BLACK,TRIM9#
- Position: Passenger Side
- Replaces: 73470-52240-C0
- Part Name Code: 73470B
- Item Weight: 1.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73470-52170-C0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Scion xB Submodels:
- Base | 4 Cyl 1.5 L GAS
View related parts
2006 Scion xB Buckle, Passenger Side
Part Number: 73230-52381-B0
$40.62 MSRP: $56.54
You Save: $15.92 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Receptacle, Front Right; Latch; Belt Assembly, Front Seat Inner, Passenger Side
- Manufacturer Note: DK.GRAY,TRIM9#
- Position: Passenger Side
- Part Name Code: 73230
- Item Weight: 1.00 Pounds
- Item Dimensions: 13.5 x 11.4 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73230-52381-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Scion xB Submodels:
- Base | 4 Cyl 1.5 L GAS
View related parts
2006 Scion xB Lap & Shoulder Belt, Outer Driver Side
Part Number: 73370-52032-C0
$167.54 MSRP: $237.18
You Save: $69.64 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear Left; Belt & Retractor; Belt Assembly, Rear Seat 3 Point Type, Outer Driver Side
- Manufacturer Note: BLACK,TRIM9#
- Position: Outer Driver Side
- Replaces: 73370-52031-C0
- Part Name Code: 73370
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73370-52032-C0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Scion xB Submodels:
- Base | 4 Cyl 1.5 L GAS
View related parts
2006 Scion xB Lap & Shoulder Belt, Outer Passenger Side
Part Number: 73360-52032-C0
$169.66 MSRP: $240.17
You Save: $70.51 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear Right; Belt & Retractor; Belt Assembly, Rear Seat 3 Point Type, Outer Passenger Side
- Manufacturer Note: BLACK,TRIM9#
- Position: Outer Passenger Side
- Replaces: 73360-52031-C0
- Part Name Code: 73360
- Item Weight: 2.30 Pounds
- Item Dimensions: 12.4 x 11.1 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73360-52032-C0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Scion xB Submodels:
- Base | 4 Cyl 1.5 L GAS
View related parts
2006 Scion xB Lap & Shoulder Belt, Black, Center
Part Number: 73350-52030-C0
$63.27 MSRP: $88.80
You Save: $25.53 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear Center; Center Seat Belt; Belt Assembly, Rear Seat, Outer Center
- Position: Center
- Part Name Code: 73350C
- Item Weight: 2.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73350-52030-C0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Scion xB Submodels:
- Base | 4 Cyl 1.5 L GAS
View related parts
2006 Scion xB Lap & Shoulder Belt, Passenger Side
Part Number: 73210-52390-C0
$263.98 MSRP: $376.90
You Save: $112.92 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Right; Belt & Retractor; Belt Assembly, Front Seat Outer, Passenger Side
- Manufacturer Note: BLACK,TRIM9#
- Position: Passenger Side
- Part Name Code: 73210
- Item Weight: 4.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73210-52390-C0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Scion xB Submodels:
- Base | 4 Cyl 1.5 L GAS
View related parts
2006 Scion xB Lap & Shoulder Belt, Driver Side
Part Number: 73220-52440-C0
$257.80 MSRP: $368.08
You Save: $110.28 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Left; Belt & Retractor; Belt Assembly, Front Seat Outer, Driver Side
- Manufacturer Note: BLACK,TRIM9#
- Position: Driver Side
- Part Name Code: 73220
- Item Weight: 4.10 Pounds
- Item Dimensions: 11.4 x 7.2 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73220-52440-C0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Scion xB Submodels:
- Base | 4 Cyl 1.5 L GAS
View related parts
2006 Scion xB Buckle, Driver Side
Part Number: 73230-52370-B0
$40.14 MSRP: $55.87
You Save: $15.73 (29%)
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Receptacle, Front Left; Latch; Belt Assembly, Front Seat Inner, Driver Side
- Manufacturer Note: DK.GRAY,TRIM9#
- Position: Driver Side
- Part Name Code: 73240
- Item Weight: 1.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73230-52370-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2006 Scion xB Submodels:
- Base | 4 Cyl 1.5 L GAS

2006 Scion xB Seat Belt

Looking for affordable OEM 2006 Scion xB Seat Belt? Explore our comprehensive catalogue of genuine 2006 Scion xB Seat Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2006 Scion xB Parts Questions & Experts Answers

Q: How to remove and install the right-hand side seat belt assembly on 2006 Scion xB?
A: The first step to remove the right-hand side seat belt assembly involves disconnecting the negative battery cable to avoid activating the Air Bag and seat belt pretensioner system for at least 90 seconds. Then, remove the front door scuff plate RH, cowl side trim board RH, front door opening trim Weather Strip RH, rear door scuff plate RH, rear door opening trim Weather Strip RH, center pillar garnish lower RH, and the front seat outer belt assembly RH by following these steps: remove the floor anchor cover, the bolt and outer belt on the floor anchor side, the shoulder anchor cover, the bolt and outer belt on the shoulder anchor side, disconnect the pretensioner connector, and remove the 2 bolts on the retractor side to completely remove the outer belt. To proceed, first disassemble the front shoulder belt anchor adjuster assembly by uninstalling its 2 bolts along with anchor adjuster from the center pillar garnish upper RH. To install the front shoulder belt anchor adjuster assembly first secure its 2 bolts with a torque of 42 N.m (428 kgf.cm, 31 ft.lbf). The first step should be to install the center pillar garnish upper RH before adding the front seat outer belt assembly RH with correct placement of its retractor side bolts that require 5.0 N.m (51 kgf.cm, 44 in.lbf) torques for upper bolts and 42 N.m (428 kgf.cm, 31 ft.lbf) torques for lower bolts. Installation requires connecting the pretensioner connector followed by placing the external belt onto the shoulder anchor side bolt (torque 42 N.m (428 kgf.cm, 31 ft.lbf) then installing the shoulder anchor cover and the outer belt with floor anchor side bolt (torque 42 N.m (428 kgf.cm, 31 ft.lbf)) Check the fastener operation of the child seat system after installation of floor anchor covers while verifying that the belt remains locked when removing it quickly. The replacement of the belt should happen in case it fails to operate according to specifications. Conclude the installation process by reinstalling the center pillar garnish lower RH together with the rear door opening trim Weather Strip RH, rear door scuff plate RH, front door opening trim Weather Strip RH, cowl side trim board RH, front door scuff plate RH and restoring the connection of the cable to the negative battery terminal.

Related 2006 Scion xB Parts

Alternate Year Models

2005 Scion xB Seat Belt