OEM 2006 Scion xB Clock Spring

2006 Scion xB Parts Questions & Experts Answers

• Q: How do you service the Clock Spring Assembly / Spiral Cable on 2006 Scion xB?

  A: Service of the Clock Spring Assembly / Clock Spring begins with connecting the cable to the negative battery terminal then waiting at least 90 seconds to stop Air Bag and seat belt pretensioner activation. The service on the Clock Spring Assembly / Clock Spring starts with removing the steering pad assembly while positioning the front wheels directly forward then removing both the steering wheel assembly and steering column cover. The first step in removing the clock spring sub-assembly requires disconnection of the Air Bag connector followed by careful handling of the Air Bag wire harness before removing the 3 claws that secure the clock spring. Start by installing the clock spring sub-assembly when the front wheels should be straight and the turn signal switch in neutral position to protect the pin from breaking. To replace the clock spring users should remove the lock pin prior to installing the steering wheel while connecting the Air Bag connector while maintaining the wire harness integrity. First attach the steering column cover with 3 screws then place the clock spring through counterclockwise motion before tightening the cable clockwise for alignment of marks but refrain from using the Air Bag wire harness when turning. To finish the operation first install the steering wheel assembly followed by the steering pad assembly and return the cable to the negative battery terminal then inspect the steering pad assembly and verify the SRS warning light and check the steering wheel position.