How to service the exhaust pipe assembly on 2005 Toyota Tacoma?

Service of the 2TR-FE exhaust pipe starts with disconnecting the negative battery terminal cable. Service technicians must use tool 09224-00010 to detach the air fuel ratio sensor which needs to be followed by removal of the oxygen sensor. Start by removing the exhaust pipe assembly tail by unfastening its 2 bolts and 2 nuts along with detaching it from the 4 exhaust pipe supports to extract the gasket from in front of the pipe. The exhaust pipe assembly front processing requires removal of 2 bolts together with 2 compression springs before detaching the front from the exhaust pipe support to extract the gasket from the exhaust manifold. Before installing the exhaust pipe assembly front it is vital to measure the compression spring length using vernier calipers; an acceptable reading should show 40.5 mm (1.594 inch) and a new spring should be obtained if this measurement is obstructed. Equip the exhaust manifold gasket with a wooden block secured by a plastic-faced hammer to insert the fresh gasket until it reaches flush position without using the previous gasket. Seamlessly fit the exhaust pipe front section to the exhaust pipe support while torquing both bolts and springs to 43 Nm (438 kgf-cm, 32 ft. lbs.). Order a new gasket and position it on the exhaust pipe front before you mount the tail to the 4 exhaust pipe supports using the 2 bolts and 2 nuts tightened to 48 Nm (489 kgf-cm, 35 ft. lbs.). After using Service Tool 09224-00010 to replace the oxygen sensor, install the air fuel ratio sensor and reconnect the negative battery cable with proper torque of 3.9 Nm (40 kgf-cm, 35 inch lbs.). Exhaust gas leakage requires the last step in the examination.

OEM 2005 Toyota Tacoma Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Exhaust Pipes found

View related parts
2005 Toyota Tacoma Front Pipe
Part Number: 17410-0C100
$1212.07 MSRP: $1626.95
You Save: $414.88 (26%)
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter; Exhaust Pipe; Converter & Pipe; Pipe Assembly, Exhaust, Front
- Position: Front
- Replaces: 17410-0C090
- Part Name Code: 17410
- Item Weight: 11.00 Pounds
- Item Dimensions: 46.8 x 17.7 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-0C100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.7 L GAS
View related parts
2005 Toyota Tacoma Front Pipe
Part Number: 17450-0P030
$1164.56 MSRP: $1563.18
You Save: $398.62 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Front; Catalytic Converter, Left; Exhaust Pipe; Converter & Pipe; Pipe Assembly, Exhaust, Front; Catalytic Converter
- Manufacturer Note: MEXICO SPEC
- Position: Front
- Part Name Code: 17450B
- Item Weight: 11.00 Pounds
- Item Dimensions: 40.4 x 14.2 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17450-0P030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2005 Toyota Tacoma Front Pipe
Part Number: 17450-0P020
$1148.05 MSRP: $1541.02
You Save: $392.97 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Front; Catalytic Converter, Left; Exhaust Pipe; Converter & Pipe; Pipe Assembly, Exhaust, Front; Catalytic Converter
- Manufacturer Note: MEXICO SPEC
- Position: Front
- Part Name Code: 17450B
- Item Weight: 22.00 Pounds
- Item Dimensions: 55.1 x 26.5 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17450-0P020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2005 Toyota Tacoma Front Pipe
Part Number: 17410-0P020
$1009.95 MSRP: $1355.64
You Save: $345.69 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter, Right; Exhaust Pipe; Pipe Assembly, Exhaust, Front
- Manufacturer Note: MEXICO SPEC
- Position: Front
- Part Name Code: 17410
- Item Weight: 2.20 Pounds
- Item Dimensions: 4.5 x 4.3 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-0P020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2005 Toyota Tacoma Muffler & Tail Pipe
Part Number: 17430-0C110
$493.15 MSRP: $661.95
You Save: $168.80 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Muffler; Direct-Fit Exhaust; System Kit; Pipe; Muffler & Pipe; Pipe Assembly, Exhaust, Tail; Muffler
- Part Name Code: 17430
- Item Weight: 16.10 Pounds
- Item Dimensions: 51.4 x 19.6 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0C110
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.7 L GAS
View related parts
2005 Toyota Tacoma Muffler & Tail Pipe
Part Number: 17430-0P030
$500.21 MSRP: $671.42
You Save: $171.21 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Tail Pipe; Muffler & Pipe; Pipe Assembly, Exhaust, Tail; Muffler
- Part Name Code: 17430
- Item Weight: 16.80 Pounds
- Item Dimensions: 51.9 x 19.8 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0P030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2005 Toyota Tacoma Muffler & Tail Pipe
Part Number: 17430-0P020
$465.30 MSRP: $624.57
You Save: $159.27 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Exhaust Muffler Assembly; Exhaust Pipe; Tail Pipe; Muffler & Pipe; Pipe Assembly, Exhaust, Tail; Muffler
- Part Name Code: 17430
- Item Weight: 16.40 Pounds
- Item Dimensions: 52.4 x 19.5 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0P020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Tacoma Submodels:
- X-Runner | 6 Cyl 4.0 L GAS
View related parts
2005 Toyota Tacoma Muffler & Tail Pipe
Part Number: 17430-0C100
$435.72 MSRP: $584.86
You Save: $149.14 (26%)
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Muffler; Direct-Fit Exhaust; System Kit; Pipe; Muffler & Pipe; Pipe Assembly, Exhaust, Tail; Muffler
- Part Name Code: 17430
- Item Weight: 16.00 Pounds
- Item Dimensions: 50.9 x 20.0 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0C100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.7 L GAS
View related parts
2005 Toyota Tacoma Muffler & Tail Pipe
Part Number: 17430-0P010
$500.21 MSRP: $671.42
You Save: $171.21 (26%)
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Muffler; Direct-Fit Exhaust; System Kit; Pipe; Muffler & Pipe; Pipe Assembly, Exhaust, Tail; Muffler
- Part Name Code: 17430
- Item Weight: 17.20 Pounds
- Item Dimensions: 52.9 x 20.0 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0P010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS

2005 Toyota Tacoma Exhaust Pipe

Looking for affordable OEM 2005 Toyota Tacoma Exhaust Pipe? Explore our comprehensive catalogue of genuine 2005 Toyota Tacoma Exhaust Pipe. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2005 Toyota Tacoma Parts Questions & Experts Answers

Q: How to service the exhaust pipe assembly on 2005 Toyota Tacoma?
A: Service of the 2TR-FE exhaust pipe starts with disconnecting the negative battery terminal cable. Service technicians must use tool 09224-00010 to detach the air fuel ratio sensor which needs to be followed by removal of the oxygen sensor. Start by removing the exhaust pipe assembly tail by unfastening its 2 bolts and 2 nuts along with detaching it from the 4 exhaust pipe supports to extract the gasket from in front of the pipe. The exhaust pipe assembly front processing requires removal of 2 bolts together with 2 compression springs before detaching the front from the exhaust pipe support to extract the gasket from the exhaust manifold. Before installing the exhaust pipe assembly front it is vital to measure the compression spring length using vernier calipers; an acceptable reading should show 40.5 mm (1.594 inch) and a new spring should be obtained if this measurement is obstructed. Equip the exhaust manifold gasket with a wooden block secured by a plastic-faced hammer to insert the fresh gasket until it reaches flush position without using the previous gasket. Seamlessly fit the exhaust pipe front section to the exhaust pipe support while torquing both bolts and springs to 43 Nm (438 kgf-cm, 32 ft. lbs.). Order a new gasket and position it on the exhaust pipe front before you mount the tail to the 4 exhaust pipe supports using the 2 bolts and 2 nuts tightened to 48 Nm (489 kgf-cm, 35 ft. lbs.). After using Service Tool 09224-00010 to replace the oxygen sensor, install the air fuel ratio sensor and reconnect the negative battery cable with proper torque of 3.9 Nm (40 kgf-cm, 35 inch lbs.). Exhaust gas leakage requires the last step in the examination.

Related 2005 Toyota Tacoma Parts

Alternate Year Models

2004 Toyota Tacoma Exhaust Pipe 2006 Toyota Tacoma Exhaust Pipe