Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2005 Toyota Tacoma Submodels:
Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
2005 Toyota Tacoma Car Speakers
Looking for affordable OEM 2005 Toyota Tacoma Car Speakers? Explore our comprehensive catalogue of genuine 2005 Toyota Tacoma Car Speakers. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2005 Toyota Tacoma Parts Questions & Experts Answers
Q: How to replace the W/Box Car Speakers Assembly No.1 on 2005 Toyota Tacoma?
A: Disconnection of the negative battery cable is required as the first step to replace the W/Box Speaker Assembly No.1. The installation process begins with removing the rear seat back assembly RH and LH and completing it with the luggage compartment side tray removal. The first step to replace W/Box Speaker Assembly No.1 requires you to disconnect its 3 connectors while removing the clamp and unscrewing the 4 bolts. Use a torx(R) socket wrench (T20) to unscrew four screws from the stereo component amplifier assembly after disconnecting the three connectors and removing the clamp from W/Box Speaker Assembly No.1. The installation of the stereo component amplifier assembly requires the torx(R) socket wrench (T20) to insert and secure the four screws. For W/Box Speaker Assembly No.1 installation use the 4 bolts to attach it while tightening them to 8.4 N.m (85 kgf.cm, 74 in.lbf) based on the specified bolt installation sequence. Install the clamp after connecting the connector. Reinstallation starts with putting back the luggage compartment side tray and rear seat back assembly LH and rear seat back assembly RH. After reconnecting to the negative battery terminal, tighten the cable with 3.9 N.m (40 kgf.cm, 35 in.lbf).