×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2005 Toyota Sequoia Axle Shaft
Car Axle Shaft- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Axle Shafts found
2005 Toyota Sequoia Axle Shaft, Rear
Part Number: 42311-34070$490.08 MSRP: $718.22You Save: $228.14 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Shaft, Rear Axle; Drive Axle Shaft, Rear; Axle Shafts; Shaft, Rear Axle, Passenger Side; Shaft, Rear Axle, Driver Side
- Position: Rear
- Item Weight: 15.60 Pounds
- Item Dimensions: 27.6 x 8.7 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 42311-34070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2005 Toyota Sequoia Axle Assembly, Front
Part Number: 43430-0C010$372.28 MSRP: $572.11You Save: $199.83 (35%)Product Specifications- Other Name: Shaft Assembly, Front Drive; CV Axle Assembly, Front Left, Front Right; GSP Cv Axle; Axle Shaft; Shaft Assembly, Front Drive, Passenger Side; Shaft Assembly, Front Drive, Driver Side; CV Axle Assembly
- Position: Front
- Item Weight: 23.70 Pounds
- Item Dimensions: 30.7 x 6.2 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43430-0C010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2005 Toyota Sequoia Axle Shaft
Looking for affordable OEM 2005 Toyota Sequoia Axle Shaft? Explore our comprehensive catalogue of genuine 2005 Toyota Sequoia Axle Shaft. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2005 Toyota Sequoia Axle Shaft Parts Q&A
- Q: How to service and repair the rear axle shaft on 2005 Toyota Sequoia?A: Start rear axle shaft servicing and repair by taking off the rear wheel then tightening it to 110 Nm (1,150 kgf-cm, 83 ft. lbs.). Use Special Service Tool: 09023-00101 to disconnect the brake line by removing the clip at 15.5 Nm (158 kgf-cm, 11 ft. lbs.). Use the appropriate torque of 105 Nm (1070 kgf-cm, 77 ft. lbs) to eliminate the brake caliper and disc through the removal of its two bolts. The dial indicator must measure bearing backlash in shaft direction against a maximum of 0.6 mm (0.024 inch); if the value exceeds this limit change the bearing assembly. The surface measurement of the axle shaft outside the hub bolt requires inspection for deviations under 0.1 mm (0.0040 inch) and demands a replacement of this shaft. The parking brake assembly must be removed followed by bolt disassembly while extracting the parking brake cable from the backing plate by applying 8.0 Nm (82 kgf-cm, 71 inch lbs.) torque. Perform the same operation on the second side of the vehicle. To finish the procedure remove the axle shaft assembly by eliminating its 4 nuts with the specified torque of 122 Nm (1,244 kgf-cm, 90 ft. lbs.) while carefully extracting the axle shaft assembly to avoid harming the oil seal and finally removing the O-ring inside the axle housing.