OEM 2005 Toyota MR2 Spyder Fan Motor

2005 Toyota MR2 Spyder Parts Questions & Experts Answers

• Q: How to service and repair the Radiator Cooling Fan Motor on 2005 Toyota MR2 Spyder?

  A: You need to start servicing the Radiator Cooling Fan Motor by first taking out the tool box and luggage compartment trim box cover then unplug the 2 electric cooling fan connectors. Proceed by removing two bolts, two nuts and two spear wheel carrier extensions before removing two bolts and the electric cooling fan. The process starts by placing the electric cooling fan correctly then fastening it with 2 bolts torqued to 5 Nm (51 kgf-cm, 44 inch lbs.). Afterwards attach the 2 spear wheel carrier extensions by using 2 bolts and 2 nuts that should be torqued to 8 Nm (82 kgf-cm, 70 inch lbs.). Lastly connect the 2 electric cooling fan connectors. To finish the procedure restore the luggage compartment trim box cover and attach the tool box. Fans and nuts must be taken off first then the wire and connector holder need to be separated from the fan shroud before removal of the fan motor using 3 screws. The reassembly process starts by mounting the fan motor to its place with the 3 screws torqued to 2.55 Nm (26 kgf-cm, 23 inch lbs.) before placing the wire and connector holder on the fan shroud and ending with the fan secured by the nut and torqued to 6.18 Nm (63 kgf-cm, 55 inch lbs.).