Other Name: Belt Assembly, Front Seat; Seat Belt Receptacle, Front Right; Latch; Belt Assembly, Front Seat Inner, Passenger Side
Manufacturer Note: GRAY,TRIM1#
Position: Passenger Side
Replaces: 73230-48160-A0
Part Name Code: 73230
Item Weight: 0.90 Pounds
Item Dimensions: 13.7 x 11.4 x 2.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73230-48160-B0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2005 Toyota Highlander Submodels:
Base, Hybrid, Hybrid Limited, Limited, SE, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Center; Center Seat Belt; Center Belt Assembly; Latch; Belt Assembly, Rear Seat, Outer Center
Manufacturer Note: GRAY,TRIM1#
Position: Center
Part Name Code: 73350C
Item Weight: 2.20 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 73350-48040-B0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2005 Toyota Highlander Submodels:
Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Center; Center Seat Belt; Center Belt Assembly; Latch; Belt Assembly, Rear Seat, Outer Center
Manufacturer Note: IVORY,TRIM0#
Position: Center
Part Name Code: 73350C
Item Weight: 2.10 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 73350-48040-A0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2005 Toyota Highlander Submodels:
Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2005 Toyota Highlander Submodels:
Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
| Page 1 of 2 |Next >
1-20 of 26 Results
2005 Toyota Highlander Seat Belt
Looking for affordable OEM 2005 Toyota Highlander Seat Belt? Explore our comprehensive catalogue of genuine 2005 Toyota Highlander Seat Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2005 Toyota Highlander Seat Belt Parts Q&A
Q: How to replace the right-hand side seat belt assemblies on 2005 Toyota Highlander?
A: The front seat inner belt assembly RH replacement process starts with taking out the front seat RH then doing the front seat cushion shield inner RH before proceeding to separate the front seat inner belt RH by removing the connector and clamp and unfastening the nut and belt from installation. Secure the front seat inner belt RH to the new nut before tightening it to 42 N.m (428 kgf.cm, 31 ft.lbf) while ensuring that the anchor part of the front belt does not overlap the protruding floor panel section. Begin by connecting the clamp and connector and then attach the negative terminal of the battery while initializing the occupant classification sensor and verifying the SRS warning lamp function. The procedure for power seat types mirrors the previous method by removing the front seat assembly RH along with power seat switch knobs before disconnecting the connector and clamp and removing the nut and belt. Installation of the new belt requires the same torque specifications. The removal procedure for the front seat outer belt assembly RH starts by taking out the scuff plates from both front and rear doors, the front then rear door opening trim Weather Strips, and the lower RH center pillar garnish. Next, use a screwdriver to remove the floor and shoulder belt anchor covers before detaching the pretensioner connector and removing the bolts along with the outer belt. To properly install the new outer belt assembly RH onto the retractor you must verify the retractor lock function while applying 7.5 N.m (77 kgf.cm, 66 in.lbf) for the upper bolt and 42 N.m (428 kgf.cm, 31 ft.lbf) for the lower bolt. After connecting the pretensioner harness to the shoulder belt mount the operator should tighten its fasteners to 42 N.m (428 kgf.cm, 31 ft.lbf) while reinstalling all parts in sequence from the center pillar garnish lower to floor anchor and front and rear door scuff plates until reaching the Weather Strips and negative battery terminal. Finally test the SRS warning lamp. Continuing with the disposal of the front seat outer belt assembly RH requires using Special Service Tools: 09082-00700 and 09082-00770 according to activation protocols that include winding before cutting followed by tool attachment to the pretensioner and implementing safety precautions for activation completion. The technician must handle the activated outer belt assembly carefully while waiting for at least thirty minutes until disposal in a plastic bag.