Other Name: Belt Assembly, Front Seat; Seat Belt Receptacle, Front Right; Latch; Belt Assembly, Front Seat Inner, Passenger Side
Manufacturer Note: GRAY,TRIM1#
Position: Passenger Side
Replaces: 73230-48160-A0
Part Name Code: 73230
Item Weight: 0.90 Pounds
Item Dimensions: 13.7 x 11.4 x 2.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73230-48160-B0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2004 Toyota Highlander Submodels:
Base, Hybrid, Hybrid Limited, Limited, SE, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Center; Center Seat Belt; Center Belt Assembly; Latch; Belt Assembly, Rear Seat, Outer Center
Manufacturer Note: GRAY,TRIM1#
Position: Center
Part Name Code: 73350C
Item Weight: 2.20 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 73350-48040-B0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2004 Toyota Highlander Submodels:
Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Center; Center Seat Belt; Center Belt Assembly; Latch; Belt Assembly, Rear Seat, Outer Center
Manufacturer Note: IVORY,TRIM0#
Position: Center
Part Name Code: 73350C
Item Weight: 2.10 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 73350-48040-A0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2004 Toyota Highlander Submodels:
Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2004 Toyota Highlander Submodels:
Base, Hybrid, Hybrid Limited, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
| Page 1 of 2 |Next >
1-20 of 26 Results
2004 Toyota Highlander Seat Belt
Looking for affordable OEM 2004 Toyota Highlander Seat Belt? Explore our comprehensive catalogue of genuine 2004 Toyota Highlander Seat Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2004 Toyota Highlander Seat Belt Parts Q&A
Q: How to replace the rear seat belt on 2004 Toyota Highlander?
A: The process for rear seat belt replacement starts with decommissioning both RH and LH rear seat assemblies followed by removing the rear seat headrest assemblies (RH and center) and then the rear seat back board carpet (RH) before uninstalling the rear cushion (RH). Begin seat belt replacement by taking out the rear seat armrest assembly from the center and the rear seat lock control lever sub-assembly along with the rear seat shoulder belt cover and rear seatback assembly from the right-hand side. Proceed with removing the rear door scuff plate (RH), the rear door opening trim Weather Strip (RH), the tonneau cover assembly along with the deck board sub-assemblies (1, 2, and 3), the luggage compartment tray, the spare wheel cover tray and both the deck side trim boxes (RH and LH). The first step includes removal of the rear floor finish plate together with the deck trim side panel assembly from the right-hand side. The first step involves removing the rear No.1 seat belt assembly outer (RH) by uninstalling its bolt before proceeding to take out the rear seat belt assembly outer center using its nut followed by uninstalling the rear seat belt assembly inner through bolt removal. The installation of the rear seat belt assembly inner requires a bolt which needs tightening to 42.0 N.m (420 kgf.cm, 31 ft.lbf). To verify the ELR function on the outer center assembly ensure that the belt automatically locks when immediately pulled. Check the tilt angle of the ELR during installation of the rear No.1 seat belt assembly outer (RH) because the belt must stay under a 45-degree opening when locked. The floor anchor gets installed through the bolt while torque reaches 42.0 N.m (420 kgf.cm, 31 ft.lbf), and the anchor must avoid the floor panel protrusions. Next, experts must secure the bolt for the rear No.1 seat belt assembly outer at 42.0 N.m (420 kgf.cm, 31 ft.lbf).