How to replace the crankshaft position sensor on 2005 Toyota 4Runner?

The crankshaft position sensor replacement begins with removing the generator assembly before proceeding to detach the engine under cover assembly rear by undoing all four bolts. The cooler compressor assembly separation starts by removing its bolt to disconnect suction hose sub-assembly and cooler compressor assembly connector before removing 4 bolts for removing the cooler compressor assembly from the V-ribbed belt tensioner assembly. The replacement process begins with removing the crankshaft position sensor bolt and disconnecting its connector. Mild engine oil should be applied to the new crankshaft position sensor O-ring before installation with its bolt. Torque the bolt to 10 Nm (102 kgf.cm, 7 ft.lbf) before connecting the crankshaft position sensor connector. The replacement process starts by reinstalling the cooler compressor assembly through 4 bolts that need torque at 25 Nm (255 kgf.cm, 18 ft.lbf). Afterward, reattach the cooler compressor assembly connector followed by securing the suction hose sub-assembly with its bolt torqued at 8.0 Nm (82 kgf.cm, 71 in.lbf). The procedure ends by reinstalling the engine under cover assembly rear with 4 bolts reaching 29 Nm (296 kgf.cm, 21 ft.lbf) torque before reinstalling the generator assembly.

OEM 2005 Toyota 4Runner Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Crankshaft Position Sensors found

View related parts
2005 Toyota 4Runner Sensor, Camshaft Position
Part Number: 90080-19014
$66.23 MSRP: $79.06
You Save: $12.83 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Cam Position; Engine Camshaft; Crankshaft; RPM Sensor
- Replaces: 90919-05026
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.0 x 2.8 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-19014
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota 4Runner Submodels:
- Base, Limited, Sport, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Toyota 4Runner Camshaft Position Sensor, Driver Side
Part Number: 90919-T5005
$97.75 MSRP: $137.21
You Save: $39.46 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor, Left; Crankshaft Position Sensor; Camshaft Sensor; Cam Sensor; Sensor, Cam Position; Engine Camshaft Position Sensor
- Manufacturer Note: (L)
- Position: Driver Side
- Replaces: 9004A-19003, 90919-05060, 90919-T5002
- Part Name Code: 11101E
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 3
- SKU: 90919-T5005
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota 4Runner Submodels:
- 40th Anniversary Edition, Limited, Nightshade, Sport, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Venture | 6 Cyl 4.0 L GAS
View related parts
2005 Toyota 4Runner Sensor, Crank Position
Part Number: 90919-A5003
$68.48 MSRP: $96.12
You Save: $27.64 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Crankshaft Position Sensor; Crankshaft Position Sensor
- Manufacturer Note: (L)
- Replaces: 90919-05057
- Part Name Code: 11401G
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.9 x 2.8 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90919-A5003
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota 4Runner Submodels:
- 40th Anniversary Edition, Limited, Nightshade, Sport, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Venture | 6 Cyl 4.0 L GAS
View related parts
2005 Toyota 4Runner Sensor, Crank Position
Part Number: 90919-A5001
$119.49 MSRP: $169.15
You Save: $49.66 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Crankshaft Position Sensor; Crankshaft Position Sensor
- Manufacturer Note: (L)
- Replaces: 90919-05035
- Part Name Code: 15100R
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.6 x 2.9 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90919-A5001
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 8 Cyl 4.7 L GAS

2005 Toyota 4Runner Crankshaft Position Sensor

Looking for affordable OEM 2005 Toyota 4Runner Crankshaft Position Sensor? Explore our comprehensive catalogue of genuine 2005 Toyota 4Runner Crankshaft Position Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2005 Toyota 4Runner Parts Questions & Experts Answers

Q: How to replace the crankshaft position sensor on 2005 Toyota 4Runner?
A: The crankshaft position sensor replacement begins with removing the generator assembly before proceeding to detach the engine under cover assembly rear by undoing all four bolts. The cooler compressor assembly separation starts by removing its bolt to disconnect suction hose sub-assembly and cooler compressor assembly connector before removing 4 bolts for removing the cooler compressor assembly from the V-ribbed belt tensioner assembly. The replacement process begins with removing the crankshaft position sensor bolt and disconnecting its connector. Mild engine oil should be applied to the new crankshaft position sensor O-ring before installation with its bolt. Torque the bolt to 10 Nm (102 kgf.cm, 7 ft.lbf) before connecting the crankshaft position sensor connector. The replacement process starts by reinstalling the cooler compressor assembly through 4 bolts that need torque at 25 Nm (255 kgf.cm, 18 ft.lbf). Afterward, reattach the cooler compressor assembly connector followed by securing the suction hose sub-assembly with its bolt torqued at 8.0 Nm (82 kgf.cm, 71 in.lbf). The procedure ends by reinstalling the engine under cover assembly rear with 4 bolts reaching 29 Nm (296 kgf.cm, 21 ft.lbf) torque before reinstalling the generator assembly.