×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2005 Scion xB Water Pump
H2O Pump- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Water Pump found
2005 Scion xB Water Pump
Part Number: 16100-29157-83$54.19 MSRP: $75.43You Save: $21.24 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Pump Assembly, Water; Engine Water Pump
- Replaces: 16100-29156-83, 16100-29156, 16100-29155, 16100-29155-83
- Item Weight: 1.60 Pounds
- Condition: New
- SKU: 16100-29157-83
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2005 Scion xB Water Pump
Looking for affordable OEM 2005 Scion xB Water Pump? Explore our comprehensive catalogue of genuine 2005 Scion xB Water Pump. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2005 Scion xB Water Pump Parts Q&A
- Q: How to replace the water pump on 2005 Scion xB?A: The water pump replacement procedure starts with draining the engine coolant before removing the engine under cover RH then the fan and generator V belt. The engine mounting insulator sub-assy RH and water pump pulley require Special Service Tool: 09960-10010 (09962-01000, 09963-00600) to remove the 3 bolts at their respective locations. The next step is to detach the water pump assembly by unfastening 3 bolts and 2 nuts then removing the water pump while separating it from the gasket. To install the components first position the new gasket and water pump using the 3 bolts and 2 nuts while implementing a torque of 11 Nm (112 kgf-cm, 8.1 ft. lbs.). Use Special Service Tool: 09960-10010 (09962-01000, 09963-00600) to install the water pump pulley by fastening its 3 bolts with a torque of 15 Nm (153 kgf-cm, 11 ft. lbs.). The next step involves reinstalling the engine mounting insulator sub-assy RH as well as the fan and generator V belt but the V-ribbed belt should be initially placed on each pulley. Adjust the V belt on the fan and generator followed by an examination of drive belt tension and deflection before reinstalling the right-hand engine under cover while tightening the bolt and nut to 5.0 Nm (51 kgf-cm, 44 inch lbs.). To complete the procedure you must add engine coolant before checking for any fluid leakages.