How to Service and Repair a Speed Sensor for Skid Control on 2005 Scion xA?

Begin the skid control sensor replacement task by detaching the wheel and then the sensor wire connector at its connection point. Before taking out the rear brake drum unit mark precisely both its and axle hub locations. Set the hub & bearing assembly assembly LH on a soft jaw vise before placing it back if you dropped it hard enough to disable the unit. Use a pin punch and a hammer to push out the two pins from Special Service Tool before taking off its two components. Detach the skid control sensor from the rear axle hub with Special Service Tools 09520-00031, 09521-00020, 09950-00020 and 2 bolts of 12 mm diameter and 1.5 mm pitch. Keep the sensor contact surface protected from damage during this process. Clean the exposed surfaces of both the hub and sensor unit before fitting the sensor onto the hub with its electrical connection at the bottom. Use Special Service Tool 09214-76011 and a press to put in the skid control sensor. This method reduces impact damage while guaranteeing no deposits confront the detection part. Reinsert the LH rear axle hub & bearing assembly then inspect axle alignment and space. Install the brake drum assembly correctly with its matchmarks. Connect the skid control sensor wire to its proper location and install the rear wheel by applying 103 Nm torque (103 kgf-cm, 76 foot pounds). To finish the process test the signal from the ABS speed sensor.

OEM 2005 Scion xA Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Speed Sensors found

View related parts
2005 Scion xA Vehicle Speed Sensor
Part Number: 89413-0C011
$104.74 MSRP: $147.02
You Save: $42.28 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Transmission; Input Sensor; Output Sensor; Transmission Revolution Sensors (SP2, NT)
- Manufacturer Note: (L)
- Replaces: 89413-0C010, 89413-32011, 89413-32010
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89413-0C011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Scion xA Submodels:
- Base | 4 Cyl 1.5 L GAS
View related parts
2005 Scion xA ABS Sensor, Front Driver Side
Part Number: 89543-52010
$222.15 MSRP: $317.19
You Save: $95.04 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Left-Hand; ABS Wheel Speed Sensor, Front Left; Sensor, Wheel Speed; Front Speed Sensor; Sensor, Speed, Front Driver Side; ABS Wheel Speed Sensor
- Position: Front Driver Side
- Part Name Code: 89543
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.1 x 6.7 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89543-52010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Scion xA Submodels:
- Base | 4 Cyl 1.5 L GAS
View related parts
2005 Scion xA ABS Sensor, Front Passenger Side
Part Number: 89542-52010
$222.15 MSRP: $317.19
You Save: $95.04 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Right-Hand; ABS Wheel Speed Sensor, Front Right; Sensor, Wheel Speed; Front Speed Sensor; Sensor, Speed, Front Passenger Side; ABS Wheel Speed Sensor
- Position: Front Passenger Side
- Part Name Code: 89542
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.2 x 6.6 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89542-52010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Scion xA Submodels:
- Base | 4 Cyl 1.5 L GAS
View related parts
2005 Scion xA Sensor Ring, Front
Part Number: 89544-52010
$209.57 MSRP: $257.02
You Save: $47.45 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Skid Control; ABS Wheel Speed Sensor, Front, Front Left, Front Right; ABS Tone Ring; ABS Sensor; Front Speed Sensor; ABS Rotor
- Manufacturer Note: KOYO
- Position: Front
- Part Name Code: 89544
- Item Weight: 0.80 Pounds
- Item Dimensions: 9.8 x 6.5 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89544-52010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Scion xA Submodels:
- Base | 4 Cyl 1.5 L GAS
View related parts
2005 Scion xA ABS Sensor, Rear
Part Number: 89544-52030
$184.29 MSRP: $226.01
You Save: $41.72 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Skid Control; ABS Wheel Speed Sensor, Rear, Rear Left, Rear Right; Sensor Ring; Sensor
- Manufacturer Note: NSK
- Position: Rear
- Replaces: 89544-52020
- Part Name Code: 89544
- Item Weight: 0.80 Pounds
- Item Dimensions: 10.1 x 6.5 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89544-52030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Scion xA Submodels:
- Base | 4 Cyl 1.5 L GAS
View related parts
2005 Scion xA ABS Sensor, Rear
Part Number: 89544-12010
$184.29 MSRP: $226.01
You Save: $41.72 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Skid Control; ABS Wheel Speed Sensor, Rear; Sensor Ring; Sensor; ABS Wheel Speed Sensor
- Manufacturer Note: KOYO
- Position: Rear
- Part Name Code: 89544
- Item Weight: 0.80 Pounds
- Item Dimensions: 9.7 x 6.3 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89544-12010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2005 Scion xA Submodels:
- Base | 4 Cyl 1.5 L GAS

2005 Scion xA Speed Sensor

Looking for affordable OEM 2005 Scion xA Speed Sensor? Explore our comprehensive catalogue of genuine 2005 Scion xA Speed Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2005 Scion xA Parts Questions & Experts Answers

Q: How to Service and Repair a Speed Sensor for Skid Control on 2005 Scion xA?
A: Begin the skid control sensor replacement task by detaching the wheel and then the sensor wire connector at its connection point. Before taking out the rear brake drum unit mark precisely both its and axle hub locations. Set the hub & bearing assembly assembly LH on a soft jaw vise before placing it back if you dropped it hard enough to disable the unit. Use a pin punch and a hammer to push out the two pins from Special Service Tool before taking off its two components. Detach the skid control sensor from the rear axle hub with Special Service Tools 09520-00031, 09521-00020, 09950-00020 and 2 bolts of 12 mm diameter and 1.5 mm pitch. Keep the sensor contact surface protected from damage during this process. Clean the exposed surfaces of both the hub and sensor unit before fitting the sensor onto the hub with its electrical connection at the bottom. Use Special Service Tool 09214-76011 and a press to put in the skid control sensor. This method reduces impact damage while guaranteeing no deposits confront the detection part. Reinsert the LH rear axle hub & bearing assembly then inspect axle alignment and space. Install the brake drum assembly correctly with its matchmarks. Connect the skid control sensor wire to its proper location and install the rear wheel by applying 103 Nm torque (103 kgf-cm, 76 foot pounds). To finish the process test the signal from the ABS speed sensor.