Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Toyota 89544-52030
ABS Sensor, Rear

2000-2006 Toyota 8954452030

Customer Questions & Expert Answers (21)
Toyota 89544-52030 ABS Sensor, Rear
  • Part Description
    Sensor, Skid Control; ABS Wheel Speed Sensor, Rear, Rear Left, Rear Right
  • Part Name Code
    89544
  • Position
    Rear
  • Replaces
    89544-52020
  • Manufacturer
    Toyota
Make sure this part fits
$189.88 MSRP: $232.88
You Save: $43.00 (19%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • 2006 Scion xB ABS Sensor, Rear Diagram for 89544-52030
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 89544-52030

  • Product Specifications

    BrandGenuine Toyota
    Part Name Code89544
    Manufacturer Part Number89544-52030
    Part DescriptionSensor, Skid Control; ABS Wheel Speed Sensor, Rear, Rear Left, Rear Right
    Other NamesSensor Ring; Sensor
    Manufacturer NoteNSK
    Item Dimensions10.1 x 6.5 x 1.7 inches
    Item Weight0.80 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces89544-52020
    Require Quantity2
    ManufacturerToyota
    SKU89544-52030
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2006 Scion xABase4 Cyl 1.5 L GAS
    2004-2006 Scion xBBase4 Cyl 1.5 L GAS
    2000-2005 Toyota EchoBase4 Cyl 1.5 L GAS
    2001-2003 Toyota PriusBase4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)

  • Customer Questions & Expert Answers

    Q:
    Can you provide the right 89544-52030 for my car? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 89544-52030 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    How to service the front wheel speed sensor on Toyota Prius? Posted by Customer
    A:
    Service of the front wheel speed sensor needs you to disconnect the speed sensor connector by first removing the front wheel with 103 Nm (1,050 kgf-cm, 76 ft. lbs.) torque and then removing the fender liner. Beginning the speed sensor service demands first removing the speed sensor connector along with its resin clip. Start with uninstalling the 2 clamp bolts that connect the sensor harness to the body and shock absorber at 5.5 Nm with a torque of 56 kgf-cm along with 49 inch lbs. Then remove the installation bolt to take out the front speed sensor from the steering knuckle at 8.0 Nm while using 82 kgf-cm and 71 inch lbs. torque values. Confirm that the sensor area and the knuckle region have no foreign material while making sure the sensor rests flat against the knuckle during bolt tightening. The installation process runs opposite to removal steps while post-installation verification should check the speed sensor signal.
    Posted by ToyotaPartsNow Specialist
    Q:
    What final check should be performed for the 2004 Scion xA? Posted by Customer
    A:
    Finally, check the ABS speed sensor signal.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the next step after installing the rear brake drum for the 2006 Scion xA? Posted by Customer
    A:
    Connect the skid control sensor wire and reinstall the rear wheel, applying a torque of 103 N.m (1,050 kgf.cm, 76 ft.lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the torque specification for securing the front speed sensor during installation for the 2006 Scion xA? Posted by Customer
    A:
    Apply a torque of 8.0 N.m (82 kgf.cm, 71 in.lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What are the torque specifications for Bolt A and Bolt B for the 2004 Scion xB? Posted by Customer
    A:
    Torque Bolt A to 8.0 Nm (82 kgf-cm, 71 inch lbs.) and Bolt B to 29 Nm (300 kgf-cm, 22 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What should be done after removing the front wheel and battery for the 2005 Scion xA? Posted by Customer
    A:
    Disconnect the speed sensor connector, remove the 2 clamp bolts securing the speed sensor wire harness to the body and shock absorber, disconnect the resin clip and wire harness from the shock absorber, and remove the bolt to take out the speed sensor front LH.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What should be removed after disconnecting the battery for the 2006 Scion xB? Posted by Customer
    A:
    Remove the front wheel.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the procedure for installing the speed sensor wire harness for the 2005 Scion xB? Posted by Customer
    A:
    Install the speed sensor wire harness with the 2 bolts on the body and shock absorber, using a torque of 8.0 Nm (82 kgf-cm, 71 inch lbs.) for Bolt A and 29 Nm (300 kgf-cm, 22 ft. lbs.) for Bolt B, while avoiding twisting the sensor wire.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    How do you remove the attachments from the Special Service Tool for the 2005 Scion xA? Posted by Customer
    A:
    Use a pin punch and hammer to drive out the 2 pins and remove the 2 attachments from Special Service Tool.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the next step after inspecting the rear axle for the 2006 Scion xB? Posted by Customer
    A:
    Install the rear brake drum sub-assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What should be done after installing the speed sensor for the 2002 Toyota Echo? Posted by Customer
    A:
    Reconnect the speed sensor connector, install the rear wheel with a torque of 103 Nm (1,050 kgf-cm, 76 ft. lbs.), and check the speed sensor signal.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    How do you remove the speed sensor from the steering knuckle for the 2005 Toyota Echo? Posted by Customer
    A:
    Remove the bolt and speed sensor from the steering knuckle with a torque of 8.0 Nm (82 kgf-cm, 71 inch lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the installation process for the new ABS speed sensor for the 2000 Toyota Echo? Posted by Customer
    A:
    Clean the contacting surface of the axle hub and the new ABS speed sensor, place the sensor on the hub with the connector at the bottom, and use Special Service Tool: 09214-76011 and a press to install the new ABS speed sensor.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    How should the new O-ring be prepared for installation for the 2004 Toyota Echo? Posted by Customer
    A:
    Coat a new O-ring with ATF before installing it onto the direct clutch speed sensor.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    How do you remove the speed sensor for the 2002 Toyota Echo? Posted by Customer
    A:
    Take out the 2 clamp bolts and a clip that secure the sensor harness to the body and shock absorber.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the installation process for the new ABS speed sensor for the 2001 Toyota Echo? Posted by Customer
    A:
    Clean the contacting surface of the axle hub and the new ABS speed sensor, place the sensor on the hub with the connector at the bottom, and use Special Service Tool: 09214-76011 and a press to install it.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What tools are needed to remove the ABS speed sensor for the 2003 Toyota Echo? Posted by Customer
    A:
    Utilize Special Service Tool: 09520-00031 (09520-00040, 09521-00020), 09950-00020, and 2 bolts (Diameter: 12 mm, Pitch: 1.5 mm).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What should be ensured before tightening the bolt for the sensor installation for the 2001 Toyota Prius? Posted by Customer
    A:
    Ensure that there are no foreign objects on the sensor or the knuckle and that the sensor is flat against the knuckle.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the first step to service and repair the rear wheel speed sensor for the 2002 Toyota Prius? Posted by Customer
    A:
    First, remove the rear wheel and disconnect the speed sensor connector.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    Q:
    What is the next step after removing the clamp bolts for the 2003 Toyota Prius? Posted by Customer
    A:
    Remove the installation bolt to detach the front speed sensor from the steering knuckle.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Speed Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 89544-52030, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 89544-52030 ABS Sensor, Rear. It is sometimes referred to as Toyota Speed Sensor. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 8954452030 ABS Sensor, Rear. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery