What is the proper procedure for activating and disposing of a front seat outer belt with a seat belt pretensioner using Special Service Tool 09082-00700, both when installed and when removed on 2005 Scion tC?

Question

Accepted Answer

Every scrap vehicle equipped with a seat belt pretensioner or front seat belt possession with pretensioner requires activation of the pretensioner before disposal. Report all abnormal events that occur during activation to the service department of Toyota Motor Sales, USA, Inc. Throwing away a front seat outer belt with a disengaged pretensioner is prohibited because the pretensioner makes noise at the time of activation. When using the pretensioner activate it from a minimum distance of 10 meters (33 feet). Wear protective gloves and safety glasses when you handle belts after pretensioner activation. Hand washing with water should follow waste disposal and actors must refrain from wetting pretensioners after their activation. The specified special service tool (SRS air bag deployment tool) 09082-00700 needs to be used for activation procedures. The system needs to have a battery ready when disposing of front seat outer belt assembly RH while it remains installed. To use the special service tool first check its functionality then connect the red clip to the battery positive terminal and the black clip to the negative terminal while confirming the activation switch LED shows an ON signal. Purge the tool because it activates the LED lamp independent of switch input. Unplug the pretensioner connector before disconnecting the battery cable and testing the SRS air bag system. Also remove the needed interior components. You need to install the floor anchor into the special service tool before connecting air bag deployment wire subharness No.5 to the air bag deployment tool. The tool needs to stand at minimum 10 m away from the vehicle and all vehicle doors must be closed before you create a window gap for the wire harness. The activation switch must be pressed only after checking that nobody stands within the vehicle's range. Attend to the outer belt only after a period of thirty minutes because it will remain hot to the touch. When you dispose of the seat belt you should begin by winding it with the retractor then cut it near the retractor by 100mm and test the special service tool. The outer belt needs placement on the ground with a tire on top while moving the tool beyond 10 m distance. To activate the pretensioner start with battery clip connection after ensuring a 10-meter gap that does not contain any people then push the activation switch. To dispose of the tool, remove it with the tire and put the outer belt into a plastic bag while tying it securely before discarding it together with normal vehicle components.

OEM 2005 Scion tC Seat Belt

9 Seat Belts found

2005 Scion tC Lap & Shoulder Belt, Passenger Side

2005 Scion tC Buckle, Driver Side

2005 Scion tC Buckle, Passenger Side

2005 Scion tC Buckle, Driver Side

2005 Scion tC Buckle, Rear Passenger Side

2005 Scion tC Lap & Shoulder Belt, Outer Passenger Side

2005 Scion tC Lap & Shoulder Belt, Outer Driver Side

2005 Scion tC Lap & Shoulder Belt, Passenger Side

2005 Scion tC Lap & Shoulder Belt, Driver Side

2005 Scion tC Seat Belt

2005 Scion tC Seat Belt Parts Q&A

Related 2005 Scion tC Parts

Alternate Year Models