How to replace the ABS Control Module in the Brake Actuator Assembly (W/O VSC) on 2004 Toyota Sienna?

The first step to replace Brake Actuator Assembly (W/O VSC) involves draining brake fluid along with immediate surface cleaning for any paint contact. The procedure starts with the removal of air cleaner assembly with hose followed by the brake actuator with bracket disconnection of its connector after unfastening the latch combined with Special Service Tool: 09023-00100 for brake tubes disconnection with connection tags for reinstallation. The brake actuator assembly will be extracted from the bracket by removing three bolts then separating it from two nuts. Begin with installing the brake actuator to the bracket through its two nuts while reaching a torque of 5.4 Nm (55 kgf-cm, 48 inch lbs.). Next, secure the brake actuator assembly to the bracket through three bolts torqued to 20 Nm (199 kgf-cm, 14 ft. lbs.). Connect all brake tubes to their designated positions on the brake actuator by using Special Service Tool: 09023-00100 for torquing them to 15 Nm (155 kgf-cm, 11 ft. lbs.). Then install the brake actuator connector back in place. Personnel should start by installing the air cleaner assembly when finished. Afterward they must add brake fluid into the reservoir then use Special Service Tool: 09023-00100 to bleed the master cylinder followed by bleeding the brake line and reservoir level inspection before leak checks and Toyota hand-held tester usage for brake actuator verification.

OEM 2004 Toyota Sienna ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 ABS Control Modules found

View related parts
2004 Toyota Sienna Hydraulic Unit
Part Number: 44050-08061
$995.95 MSRP: $1253.71
You Save: $257.76 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Control Module; Actuator
- Manufacturer Note: W(VSC)
- Part Name Code: 44510
- Item Weight: 9.20 Pounds
- Item Dimensions: 10.5 x 10.2 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-08061
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS
View related parts
2004 Toyota Sienna Hydraulic Unit
Part Number: 44050-08092
$1609.32 MSRP: $2025.82
You Save: $416.50 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Control Module; Actuator
- Manufacturer Note: CRUISE CONTROL-RADAR CRUISE CONTROL
- Replaces: 44050-08091
- Part Name Code: 44510
- Item Weight: 5.20 Pounds
- Item Dimensions: 8.9 x 7.7 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-08092
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS
View related parts
2004 Toyota Sienna Hydraulic Unit
Part Number: 44050-08030
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Control Module; Actuator
- Part Name Code: 44510
- Item Weight: 4.90 Pounds
- Item Dimensions: 9.3 x 8.0 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-08030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS
View related parts
2004 Toyota Sienna Hydraulic Unit
Part Number: 44050-08081
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Control Module; Actuator
- Replaces: 44050-08090, 44050-08080
- Part Name Code: 44510
- Item Weight: 4.90 Pounds
- Item Dimensions: 9.0 x 7.9 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-08081
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS
View related parts
2004 Toyota Sienna Hydraulic Unit
Part Number: 44050-08072
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Control Module; Actuator
- Manufacturer Note: CRUISE CONTROL-RADAR CRUISE CONTROL&W(VSC)
- Replaces: 44050-08071
- Part Name Code: 44510
- Item Weight: 4.90 Pounds
- Item Dimensions: 9.0 x 7.7 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-08072
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2004 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS

2004 Toyota Sienna ABS Control Module

Looking for affordable OEM 2004 Toyota Sienna ABS Control Module? Explore our comprehensive catalogue of genuine 2004 Toyota Sienna ABS Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2004 Toyota Sienna Parts Questions & Experts Answers

Q: How to replace the ABS Control Module in the Brake Actuator Assembly (W/O VSC) on 2004 Toyota Sienna?
A: The first step to replace Brake Actuator Assembly (W/O VSC) involves draining brake fluid along with immediate surface cleaning for any paint contact. The procedure starts with the removal of air cleaner assembly with hose followed by the brake actuator with bracket disconnection of its connector after unfastening the latch combined with Special Service Tool: 09023-00100 for brake tubes disconnection with connection tags for reinstallation. The brake actuator assembly will be extracted from the bracket by removing three bolts then separating it from two nuts. Begin with installing the brake actuator to the bracket through its two nuts while reaching a torque of 5.4 Nm (55 kgf-cm, 48 inch lbs.). Next, secure the brake actuator assembly to the bracket through three bolts torqued to 20 Nm (199 kgf-cm, 14 ft. lbs.). Connect all brake tubes to their designated positions on the brake actuator by using Special Service Tool: 09023-00100 for torquing them to 15 Nm (155 kgf-cm, 11 ft. lbs.). Then install the brake actuator connector back in place. Personnel should start by installing the air cleaner assembly when finished. Afterward they must add brake fluid into the reservoir then use Special Service Tool: 09023-00100 to bleed the master cylinder followed by bleeding the brake line and reservoir level inspection before leak checks and Toyota hand-held tester usage for brake actuator verification.