How to Service and Repair the ABS Control Module on 2003 Toyota Sienna?

The service process of the Hydraulic Control Assembly for Antilock Brakes starts with air cleaner assembly removal and brake line disconnection performed with Special Service Tool: 09023-00100, 09023-38200 to separate the 6 brake lines from the ABS actuator while tightening the 10 mm nut to 15.2 N.m (155 kgf.cm, 11 ft.lb) and the 12 mm nut to 19.6 N.m (200 kgf.cm, 14.5 ft.lb). The initial task requires disconnecting the connector followed by removing 3 nuts securing the ABS actuator assembly before proceeding to remove 4 nuts and bracket while torquing them to 12.7 N.m (130 kgf.cm, 9 ft.lb). Dropping the actuator during this process requires immediate disqualification of vehicle assembly with the actuator. The brake fluid should be filled into the reservoir after installation following the brake system bleeding and leak inspection.

OEM 2003 Toyota Sienna ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 ABS Control Modules found

View related parts
2003 Toyota Sienna Control Module
Part Number: 89541-08020
$2643.07 MSRP: $3873.46
You Save: $1230.39 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Computer, Skid Control; ABS Control Module
- Manufacturer Note: W(VSC)
- Part Name Code: 89541
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.5 x 7.3 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89541-08020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Sienna Submodels:
- CE, LE, XLE | 6 Cyl 3.0 L GAS
View related parts
2003 Toyota Sienna Motor & Pump
Part Number: 44050-08020
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator
- Manufacturer Note: W(VSC)
- Part Name Code: 44510
- Item Weight: 8.10 Pounds
- Item Dimensions: 9.2 x 7.7 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-08020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Sienna Submodels:
- CE, LE, XLE | 6 Cyl 3.0 L GAS
View related parts
2003 Toyota Sienna Motor & Pump
Part Number: 44050-08050
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator
- Part Name Code: 44510
- Item Weight: 4.10 Pounds
- Item Dimensions: 9.1 x 7.1 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-08050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Sienna Submodels:
- CE, LE, XLE | 6 Cyl 3.0 L GAS

2003 Toyota Sienna ABS Control Module

Looking for affordable OEM 2003 Toyota Sienna ABS Control Module? Explore our comprehensive catalogue of genuine 2003 Toyota Sienna ABS Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2003 Toyota Sienna Parts Questions & Experts Answers

Q: How to Service and Repair the ABS Control Module on 2003 Toyota Sienna?
A: The service process of the Hydraulic Control Assembly for Antilock Brakes starts with air cleaner assembly removal and brake line disconnection performed with Special Service Tool: 09023-00100, 09023-38200 to separate the 6 brake lines from the ABS actuator while tightening the 10 mm nut to 15.2 N.m (155 kgf.cm, 11 ft.lb) and the 12 mm nut to 19.6 N.m (200 kgf.cm, 14.5 ft.lb). The initial task requires disconnecting the connector followed by removing 3 nuts securing the ABS actuator assembly before proceeding to remove 4 nuts and bracket while torquing them to 12.7 N.m (130 kgf.cm, 9 ft.lb). Dropping the actuator during this process requires immediate disqualification of vehicle assembly with the actuator. The brake fluid should be filled into the reservoir after installation following the brake system bleeding and leak inspection.