×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2004 Toyota 4Runner Spoiler
Spoiler Wing- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Spoilers found
Product Specifications- Other Name: Spoiler Sub-Assembly, Rear; Spoiler, Rear
- Position: Rear
- Replaces: 76085-35070-E0, 76085-35070-F0, 76085-35070-J0, 76085-35070-J1, 76085-35070-B2, 76085-35070-J2, 76085-35070-A1, 76085-35070-B1, 76085-35050-C0, 76085-35050-A1, 76085-35070-J3
- Condition: New
- SKU: 76085-35904
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
- Product Specifications
- Other Name: Spoiler Sub-Assembly, Rear; Spoiler, Rear
- Manufacturer Note: REAR SPOILER-WITH,DK.GREEN MC.,6Q7
- Position: Rear
- Part Name Code: 76085
- Item Weight: 7.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 76085-35050-G0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
- Product Specifications
- Other Name: Spoiler Sub-Assembly, Rear; Spoiler, Rear
- Manufacturer Note: REAR SPOILER-WITH,RED M.M.,3P1
- Position: Rear
- Part Name Code: 76085
- Item Weight: 7.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 76085-35050-D0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2004 Toyota 4Runner Spoiler
Looking for affordable OEM 2004 Toyota 4Runner Spoiler? Explore our comprehensive catalogue of genuine 2004 Toyota 4Runner Spoiler. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2004 Toyota 4Runner Parts Questions & Experts Answers
- Q: How to replace the rear spoiler on 2004 Toyota 4Runner?A: A replacement of the rear spoiler starts by removing 2 grommets and 2 bolts followed by removing the spoiler along with disconnecting the center stop lamp connector. Start by removing the center stop lamp assembly through removing its two securing bolts. The drill tip used for cutting rear spoiler clip No.1 must be smaller than Dia 4 mm (0.16 in.) while tape coverage should extend 5 mm (0.20 in.) to depth to avoid damaging the drill. Put the drill tip delicately on the rivet to cut its flanges while removing the rivet but handle both processes cautiously because the newly cut rivet will remain hot. Take away the 2 spoiler clips which are attached to the back door panel. The proper installation of rear spoiler clip No.1 requires an air riveter or hand riveter with a nose piece to strike waterproof Dia 4 mm rivets perpendicularly at the body panel to prevent mandrel bending. After installing the center stop lamp assembly with its two bolts tighten them until reaching 2.5 N.m of torque (25 kgf.cm or 22 in.lbf). You should connect the center stop lamp connector while also installing the spoiler with 2 bolts and 2 grommets before torquing to 7.0 N.m (71 kgf.cm, 62 in.lbf).
Related 2004 Toyota 4Runner Parts
2004 Toyota 4Runner Bumper
2004 Toyota 4Runner Grille
2004 Toyota 4Runner Door Lock Actuator
2004 Toyota 4Runner Air Deflector
2004 Toyota 4Runner Cigarette Lighter
2004 Toyota 4Runner Floor Pan
2004 Toyota 4Runner Fuel Door Hinge
2004 Toyota 4Runner Hood Hinge
2004 Toyota 4Runner Interior Door Handle
2004 Toyota 4Runner Rear Passenger Door Handle Latch
2004 Toyota 4Runner Wheelhouse
2004 Toyota 4Runner Wiper Motor