×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2003 Toyota 4Runner Spoiler
Spoiler Wing- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Spoilers found
Product Specifications- Other Name: Spoiler Sub-Assembly, Rear; Spoiler, Rear
- Position: Rear
- Replaces: 76085-35070-E0, 76085-35070-F0, 76085-35070-J0, 76085-35070-J1, 76085-35070-B2, 76085-35070-J2, 76085-35070-A1, 76085-35070-B1, 76085-35050-C0, 76085-35050-A1, 76085-35070-J3
- Condition: New
- SKU: 76085-35904
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
- Product Specifications
- Other Name: Spoiler Sub-Assembly, Rear; Spoiler, Rear
- Manufacturer Note: REAR SPOILER-WITH,DK.GREEN MC.,6Q7
- Position: Rear
- Part Name Code: 76085
- Item Weight: 7.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 76085-35050-G0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
- Product Specifications
- Other Name: Spoiler Sub-Assembly, Rear; Spoiler, Rear
- Manufacturer Note: REAR SPOILER-WITH,RED M.M.,3P1
- Position: Rear
- Part Name Code: 76085
- Item Weight: 7.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 76085-35050-D0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2003 Toyota 4Runner Spoiler
Looking for affordable OEM 2003 Toyota 4Runner Spoiler? Explore our comprehensive catalogue of genuine 2003 Toyota 4Runner Spoiler. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2003 Toyota 4Runner Spoiler Parts Q&A
- Q: How to replace the rear spoiler on 2003 Toyota 4Runner?A: The replacement process for the rear spoiler begins by removing 2 grommets together with 2 bolts before separating the spoiler and disconnecting its center stop lamp connector. You should remove the center stop lamp assembly next following the removal of its two bolts. A drill with a tip under Dia 4 mm (0.16 in.) should be used on rear spoiler clip No.1 and a tape should be applied to the drill tip at 5 mm (0.20 in.) to avoid excessive drilling penetration. Hook the drill's tip onto the rivet before you cut its flanges and extract the rivet while taking caution against the hotness of the cut rivet. The back door panel requires removal of its two spoiler clips after drilling is complete. You must strike waterproof rivets of 4 millimeters diameter into the body panel at each of rear spoiler clip attachment points by using an air riveter with corresponding nose piece. To prevent mandrel bending place the rivet at a right angle to its base. Fasten the center stop lamp assembly using two bolts which require torquing at 2.5 N.m (25 kgf.cm, 22 in.lbf). Instal the spoiler by connecting its center stop lamp connector and using two bolts with grommets while tightening to 7.0 N.m (71 kgf.cm, 62 in.lbf).