How to service and repair the throttle body on 2003 Toyota Tacoma?

Service and repair of the throttle body begins by draining the engine coolant before proceeding. The procedure starts by removing the accelerator cable from the throttle body which should be followed by disconnecting the throttle cable in automatic transmission models. Detach the air cleaner hose with resonator by unclipping its two wire clips then releasing air cleaner clamp fasteners before removing this assembly together. First disconnect the intake air connector before proceeding to remove the throttle body through disconnection of the PCV hose combined with the EVAP hose and power steering air hose when present. Unplug the throttle position sensor and IAC valve connectors after which you can remove the throttle body connected to the air intake chamber by removing its 2 bolts and 2 nuts while using a torque of 20 N.m (200 kgf.cm, 14 ft.lbf). The water bypass hoses need removal before the throttle body disassembly process begins by using a new gasket. The installation sequence runs in reverse order of the previous removal tasks. Examining the throttle body requires application of carburetor cleaner and soft brush cleaning followed by compressed air passage cleansing that should not reach the throttle position sensor nor IAC valve to protect them from wear. Use vacuum to test the throttle valve as the throttle lever should not move away from the throttle stop screw when fully closed. When checking the throttle position sensor position the thickness gauge between the throttle stop screw and stop lever and check the resistance between terminals by using an ohmmeter while applying vacuum to the throttle opener.

OEM 2003 Toyota Tacoma Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Throttle Bodies found

View related parts
2003 Toyota Tacoma Throttle Body
Part Number: 22210-75210
$379.31 MSRP: $555.88
You Save: $176.57 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Body Assembly, Throttle
- Part Name Code: 22210
- Item Weight: 2.30 Pounds
- Item Dimensions: 12.5 x 12.6 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22210-75210
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Tacoma Submodels:
- Base, DLX, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS
View related parts
2003 Toyota Tacoma Throttle Body
Part Number: 22210-75240
$378.51 MSRP: $554.72
You Save: $176.21 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Body Assembly, Throttle
- Part Name Code: 22210
- Item Weight: 4.40 Pounds
- Item Dimensions: 9.0 x 7.7 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22210-75240
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Tacoma Submodels:
- Base, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS
View related parts
2003 Toyota Tacoma Throttle Body
Part Number: 22210-62230
Product Specifications
- Other Name: Body Assembly, Throttle
- Part Name Code: 22210
- Item Weight: 10.80 Pounds
- Item Dimensions: 10.5 x 6.3 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22210-62230
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5 | 6 Cyl 3.4 L GAS
View related parts
2003 Toyota Tacoma Throttle Body
Part Number: 22210-62250
Product Specifications
- Other Name: Body Assembly, Throttle
- Part Name Code: 22210
- Item Weight: 5.50 Pounds
- Item Dimensions: 8.8 x 7.3 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22210-62250
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Tacoma Submodels:
- Base, DLX, Limited, SR5 | 6 Cyl 3.4 L GAS
View related parts
2003 Toyota Tacoma Throttle Body
Part Number: 22210-62210
Product Specifications
- Other Name: Body Assembly, Throttle
- Part Name Code: 22210
- Item Weight: 5.30 Pounds
- Item Dimensions: 12.6 x 12.4 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22210-62210
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Tacoma Submodels:
- Base, DLX, Pre Runner, SR5, S-Runner | 6 Cyl 3.4 L GAS
View related parts
2003 Toyota Tacoma Throttle Body
Part Number: 22210-62220
Product Specifications
- Other Name: Body Assembly, Throttle
- Part Name Code: 22210
- Item Weight: 9.40 Pounds
- Item Dimensions: 13.4 x 10.3 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22210-62220
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 6 Cyl 3.4 L GAS
View related parts
2003 Toyota Tacoma Throttle Body
Part Number: 22210-62260
Product Specifications
- Other Name: Body Assembly, Throttle
- Manufacturer Note: W(*CRC)
- Part Name Code: 22210
- Item Weight: 5.30 Pounds
- Item Dimensions: 8.8 x 7.3 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22210-62260
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 6 Cyl 3.4 L GAS
View related parts
2003 Toyota Tacoma Throttle Body
Part Number: 22210-75250
Product Specifications
- Other Name: Body Assembly, Throttle; Idle Air Control Valve; Idle Control Motor; Idle Speed Control
- Part Name Code: 22210
- Item Weight: 2.50 Pounds
- Item Dimensions: 9.3 x 8.0 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22210-75250
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Tacoma Submodels:
- Base, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS
View related parts
2003 Toyota Tacoma Throttle Body
Part Number: 22210-62240
Product Specifications
- Other Name: Body Assembly, Throttle
- Manufacturer Note: MARK 62240
- Part Name Code: 22210
- Item Weight: 2.60 Pounds
- Item Dimensions: 8.7 x 7.3 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22210-62240
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Tacoma Submodels:
- Base, DLX, Pre Runner, SR5, S-Runner | 6 Cyl 3.4 L GAS

2003 Toyota Tacoma Throttle Body

Looking for affordable OEM 2003 Toyota Tacoma Throttle Body? Explore our comprehensive catalogue of genuine 2003 Toyota Tacoma Throttle Body. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2003 Toyota Tacoma Parts Questions & Experts Answers

Q: How to service and repair the throttle body on 2003 Toyota Tacoma?
A: Service and repair of the throttle body begins by draining the engine coolant before proceeding. The procedure starts by removing the accelerator cable from the throttle body which should be followed by disconnecting the throttle cable in automatic transmission models. Detach the air cleaner hose with resonator by unclipping its two wire clips then releasing air cleaner clamp fasteners before removing this assembly together. First disconnect the intake air connector before proceeding to remove the throttle body through disconnection of the PCV hose combined with the EVAP hose and power steering air hose when present. Unplug the throttle position sensor and IAC valve connectors after which you can remove the throttle body connected to the air intake chamber by removing its 2 bolts and 2 nuts while using a torque of 20 N.m (200 kgf.cm, 14 ft.lbf). The water bypass hoses need removal before the throttle body disassembly process begins by using a new gasket. The installation sequence runs in reverse order of the previous removal tasks. Examining the throttle body requires application of carburetor cleaner and soft brush cleaning followed by compressed air passage cleansing that should not reach the throttle position sensor nor IAC valve to protect them from wear. Use vacuum to test the throttle valve as the throttle lever should not move away from the throttle stop screw when fully closed. When checking the throttle position sensor position the thickness gauge between the throttle stop screw and stop lever and check the resistance between terminals by using an ohmmeter while applying vacuum to the throttle opener.

Related 2003 Toyota Tacoma Parts

Alternate Year Models

2002 Toyota Tacoma Throttle Body 2004 Toyota Tacoma Throttle Body