How to service and repair the Sway Bar Kit on 2003 Toyota Tacoma?

The sway bar kit servicing process begins by removing front wheels and properly tightening them to 110 Nm (1,150 kgf-cm, 83 ft. lbs.). The sway bar kit removal begins by unscrewing 2 nuts and sway bar link and 2 retainers and 2 bushings while tightening the sway bar kit side to 29.5 Nm (300 kgf-cm, 22 ft. lbs.) and the lower arm side to 90 Nm (920 kgf-cm, 66 ft. lbs.); if the ball joint stud moves with the nut apply a hexagon wrench to keep the stud secure. Complete the procedure by removing both 4 bolts alongside the sway bar kit stuff and metal brackets at 29 Nm (300 kgf-cm, 22 ft. lbs.) torque. Take off the brackets and cushions from the sway bar kit before assembly while placing the cushion inside the paint line. The ball joint stud needs to be examined for proper rotation before nut installation by performing 5 full rotations with the ball joint stud. The torque wrench operation entails a slow and continuous 1-turn rotation every 2 - 4 seconds before recording torque measurements at the 5th turn between 0.05 - 2.0 Nm (0.5 - 20 kgf-cm, 0.4 - 17 inch lbs.). Reverse removal order is used for completing installation steps.

OEM 2003 Toyota Tacoma Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Sway Bar Kits found

View related parts
2003 Toyota Tacoma Stabilizer Bar, Front
Part Number: 48811-AD010
$136.96 MSRP: $193.88
You Save: $56.92 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Manufacturer Note: OFF ROAD PACKAGE
- Position: Front
- Part Name Code: 48811
- Item Weight: 7.50 Pounds
- Item Dimensions: 43.8 x 12.2 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-AD010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Tacoma Submodels:
- Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2003 Toyota Tacoma Stabilizer Bar, Front
Part Number: 48811-AD040
$165.60 MSRP: $234.43
You Save: $68.83 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Part Name Code: 48811
- Item Weight: 8.00 Pounds
- Item Dimensions: 44.2 x 12.0 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-AD040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Tacoma Submodels:
- Base, Pre Runner, S-Runner | 6 Cyl 3.4 L GAS
View related parts
2003 Toyota Tacoma Stabilizer Bar, Front
Part Number: 48811-04110
$138.29 MSRP: $195.76
You Save: $57.47 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar; Bar, Stabilizer, Front
- Position: Front
- Part Name Code: 48811
- Item Weight: 13.10 Pounds
- Item Dimensions: 55.7 x 13.7 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-04110
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Tacoma Submodels:
- Base, Pre Runner, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
2003 Toyota Tacoma Stabilizer Bar, Front
Part Number: 48811-04090
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Part Name Code: 48811
- Item Weight: 8.10 Pounds
- Item Dimensions: 42.5 x 12.2 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-04090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Tacoma Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2003 Toyota Tacoma Stabilizer Bar, Rear
Part Number: 48805-AD020
Product Specifications
- Other Name: Bar Sub-Assembly, Rear Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Part Name Code: 48805
- Item Weight: 5.10 Pounds
- Item Dimensions: 41.6 x 9.2 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48805-AD020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS

2003 Toyota Tacoma Sway Bar Kit

Looking for affordable OEM 2003 Toyota Tacoma Sway Bar Kit? Explore our comprehensive catalogue of genuine 2003 Toyota Tacoma Sway Bar Kit. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2003 Toyota Tacoma Parts Questions & Experts Answers

Q: How to service and repair the Sway Bar Kit on 2003 Toyota Tacoma?
A: The sway bar kit servicing process begins by removing front wheels and properly tightening them to 110 Nm (1,150 kgf-cm, 83 ft. lbs.). The sway bar kit removal begins by unscrewing 2 nuts and sway bar link and 2 retainers and 2 bushings while tightening the sway bar kit side to 29.5 Nm (300 kgf-cm, 22 ft. lbs.) and the lower arm side to 90 Nm (920 kgf-cm, 66 ft. lbs.); if the ball joint stud moves with the nut apply a hexagon wrench to keep the stud secure. Complete the procedure by removing both 4 bolts alongside the sway bar kit stuff and metal brackets at 29 Nm (300 kgf-cm, 22 ft. lbs.) torque. Take off the brackets and cushions from the sway bar kit before assembly while placing the cushion inside the paint line. The ball joint stud needs to be examined for proper rotation before nut installation by performing 5 full rotations with the ball joint stud. The torque wrench operation entails a slow and continuous 1-turn rotation every 2 - 4 seconds before recording torque measurements at the 5th turn between 0.05 - 2.0 Nm (0.5 - 20 kgf-cm, 0.4 - 17 inch lbs.). Reverse removal order is used for completing installation steps.