Other Name: Spring Assembly, Rear; Leaf Spring, Rear, Rear Right; Coil Springs; Spring Assembly; Spring Assembly, Rear Passenger Side; Spring Assembly, Rear Driver Side
Manufacturer Note: 4-LEAF,HEAVY DUTY SPRING
Position: Rear
Item Weight: 17.30 Pounds
Item Dimensions: 41.7 x 6.8 x 2.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48210-04340
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2003 Toyota Tacoma Submodels:
Base, DLX, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
Other Name: Spring Assembly, Rear Left-Hand; Leaf Spring, Rear Left; Coil Springs; Spring Assembly; Leaf Spring Assembly; Spring Assembly, Rear Driver Side
Position: Rear Driver Side
Replaces: 48220-04340, 48220-04341
Part Name Code: 48220
Condition: New
Fitment Type: Direct Replacement
SKU: 48220-04342
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2003 Toyota Tacoma Submodels:
Base, Limited, Pre Runner, SR, SR5, S-Runner, Trail, Trail Special Edition, TRD Off-Road, TRD Pro, TRD Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
Other Name: Spring Assembly, Rear; Leaf Spring, Rear; Coil Springs; Spring Assembly; Spring Assembly, Rear Passenger Side; Spring Assembly, Rear Driver Side
Manufacturer Note: 3-LEAF
Position: Rear
Item Weight: 17.50 Pounds
Item Dimensions: 41.7 x 6.9 x 2.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48210-04310
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2003 Toyota Tacoma Submodels:
Base, Pre Runner, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
Other Name: Spring Assembly, Rear Right-Hand; Leaf Spring, Rear Right; Coil Springs; Spring Assembly; Spring Assembly, Rear Passenger Side
Position: Rear Passenger Side
Part Name Code: 48210
Item Weight: 17.30 Pounds
Item Dimensions: 42.1 x 6.9 x 3.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48210-04130
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2003 Toyota Tacoma Submodels:
Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
2003 Toyota Tacoma Leaf Spring
Looking for affordable OEM 2003 Toyota Tacoma Leaf Spring? Explore our comprehensive catalogue of genuine 2003 Toyota Tacoma Leaf Spring. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2003 Toyota Tacoma Parts Questions & Experts Answers
Q: How to remove the leaf spring on 2003 Toyota Tacoma?
A: By working on the specified models (RZN191L-TRPDKAB, RZN196L-CRPDKAB, PZN196L-PRPDKAB, VZN195L-CRPDKAB, VZN195L-PRPDKAB), maintenance must begin with body support through safety stands while jacking up the body so that the leaf spring free of tension. First disconnect the parking brake cable for 4WD models and afterward remove the rear wheel using a 110 Nm (1,150 kgf-cm, 83 ft. lbs.) torque. After that, disconnect the rear shock absorber by removing the bolt, in which a torque of 26 Nm (260 kgf-cm, 19 ft. lbs.) is needed for 2WD (except pre runner) or a torque of 71 Nm (730 kgf-cm, 53 ft. lbs.) is required for 4WD and pre runner. The U-bolt mounting nuts and washers should first be removed from the 4 mounting points before extracting the spring seat and U-bolts with a torque of 123 Nm (1,250 kgf-cm, 90 ft. lbs.). The U-bolts must be of equal length during this process. When performing the repair on 4WD and pre runner models remove the spring bumper. You need to remove the rear leaf spring by first taking out the hanger pin bolt with a torque of 157 Nm (1,600 kgf-cm, 116 ft. lbs.) and washer and nut before removing the shackle pin plate and two shackle pin mounting nuts and washers with a torque of 92 Nm (930 kgf-cm, 67 ft. lbs.). To replace the front eye bushing use Special Service Tool: 09550-10013 (09252-10010, 09553-10010) with a press then cut both bushing tabs for the rear eye bushings following the installation with Special Service Tool: 09950-60010 (09951-00350) 09950-70010 (09951-07150) and press. The spring clip needs to be first prised up then the center bolt must be removed while holding the spring steady using a vise. Next drill off the rivet head before installing a new rivet followed by tightening the spring center bolt to 44 Nm (450 kgf-cm, 33 ft. lbs.) before bending the clip back into position. When replacing the spring bumper on 2WD models (all except pre runner) perform the operation with a torque setting at 29 Nm (300 kgf-cm, 22 ft. lbs.). Organization of installation follows the exact reverse sequence of removal steps.