OEM 2003 Toyota Highlander Spoiler

2003 Toyota Highlander Parts Questions & Experts Answers

• Q: How to replace the rear spoiler on 2003 Toyota Highlander?

  A: Begin by removing the back window panel trim upper before you detach the rear spoiler through its two bolts and nut. Apply gentle heat from a low-powered lamp to both body and rear spoiler surfaces while keeping temperatures between 40 and 60 degrees C (104 to 140 degrees F). Do not allow the components to become overheated. The wire's two ends must be attached to the wooden block before using it to remove adhesive tape while avoiding damage to both the rear spoiler and body during reinstallation. To attach the new spoiler begin by heating both the body and spoiler surface to 40 - 60 degrees C (104 - 140 degrees F) then eliminate the adhesive tape from the underlying body. Stains should be cleaned on the surface and the rear spoiler receives heat to 20 - 30 degrees C (68 - 86 degrees F) for tape removal before cleaning off any residue. Finish by attaching the new spoiler adhesive tape and reuse the heating process to avoid excessive heat exposure. Lift the rear spoiler and gently remove the release sheet from its surface while avoiding exposure to dirt or dust on uncoated areas by using your thumbs to apply even pressure without applying excess force.