How to use a Cigarette Lighter to replace the Power Point Socket Assembly RR on 2003 Toyota Highlander?

Question

Accepted Answer

The process to install a new Cigarette Lighter Socket Assembly RR starts with removing it through a screwdriver operation that separates the claw on the cigarette lighter socket cover from the socket hole followed by a 10 mm (0.39 in.) pulling motion. A tape should be placed on the screwdriver tip before performing the operation. The removal process begins with unscrewing the claw from the cigarette lighter socket cover by using a taped screwdriver tip. Afterward separate the socket and cover assembly keeping the taped screwdriver tip in place. Split the connector before separating the cigarette lighter socket from the socket cover. The cigarette lighter socket needs to be installed towards the position where it rests 10 mm (0.39 in.) short of complete lock on the cover. Mount the claw of the cigarette lighter socket cover onto the body cut-out slot followed by assembly to the body structure. To secure the cigarette lighter socket insert it until it reaches a distance of 10 mm (0.39 inches) from the absolute lock position.

OEM 2003 Toyota Highlander Cigarette Lighter

2 Cigarette Lighters found

2003 Toyota Highlander Lighter Assembly, Cigarette, Front

2003 Toyota Highlander Lighter Knob

2003 Toyota Highlander Cigarette Lighter

2003 Toyota Highlander Parts Questions & Experts Answers

Related 2003 Toyota Highlander Parts

Alternate Year Models