How to replace the rear seat belt on 2003 Toyota Corolla?

Replace the rear seat belt by starting with the removal of rear door opening trim boards from both right and left sides before taking out the rear seat cushion assembly. Both fixed and separated type rear seats require the removal of their back assemblies followed by their side cover and garnish on fixed type vehicles while separated types need their partition room boards. Use the hole slit to get the package tray trim panel assembly out from its position before working on the roof side garnish inner pieces on both sides. Start by removing the rear seat 3 point type belt assembly outer through floor anchor bolt extraction and proceed to take out the rear seat inner with center belt assembly from both right and left sides and finally the child restraint seat anchor bracket sub-assembly from the right side. Use 2 bolts to install the child restraint seat anchor bracket RH on the right side with a torque setting of 18.1 Nm (185 kgf.cm, 13.3 ft.lbf) before installing the rear seat inner with center belt assembly LH at a torque of 41.2 Nm (420 kgf.cm, 30 ft.lbf). Make sure the anchor part avoids contact with the floor panel protrusion. The rear seat belt assembly outer center requires replacement if the belt locking mechanism fails to engage with the proper 15 degrees but remains locked at more than 45 degrees. To complete this operation install the rear seat belt assembly outer center item by applying torque to 41.2 Nm (420 kgf.cm, 30 ft.lbf) and double-check both ELR locking functionality and the correct child restraint system fastener operation. For the rear seat inner with center belt assembly RH the installation procedure should be repeated, while torquing all bolts to 41.2 Nm (420 kgf.cm, 30 ft.lbf) and verifying the anchor part clears the floor panel protrusion. When assembly work completes move forward to place back the room partition boards and rear seat side components ready to finish the operation for both types of rear seat back assemblies.

OEM 2003 Toyota Corolla Seat Belt

Seat Safety Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Seat Belts found

View related parts
2003 Toyota Corolla Buckle, Driver Side GREY
Part Number: 73240-02030-B1
$26.16 MSRP: $36.41
You Save: $10.25 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Receptacle, Left; Latch; Belt Assembly, Front Seat Inner, Driver Side
- Manufacturer Note: DK.GRAY,TRIM1#
- Position: Driver Side
- Replaces: 73240-02030-B0, 73240-02030-E0
- Part Name Code: 73240
- Item Weight: 2.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73240-02030-B1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Corolla Submodels:
- CE, LE, S | 4 Cyl 1.8 L GAS
View related parts
2003 Toyota Corolla Buckle, Driver Side
Part Number: 73480-02140-B1
$42.89 MSRP: $59.70
You Save: $16.81 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Rear Seat I; Seat Belt Receptacle, Left; Latch; Belt Assembly, Rear Seat Inner W/Center, Driver Side
- Manufacturer Note: DK. GRAY,TRIM1#
- Position: Driver Side
- Replaces: 73480-02140-B0, 73480-02140-E0
- Part Name Code: 73480
- Item Weight: 1.00 Pounds
- Item Dimensions: 14.2 x 10.3 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73480-02140-B1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Corolla Submodels:
- CE, LE, S | 4 Cyl 1.8 L GAS
View related parts
2003 Toyota Corolla Lap Belt, Passenger Side
Part Number: 73470-02110-B1
$141.69 MSRP: $200.58
You Save: $58.89 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Rear Seat I; Seat Belt; Lap Belt Assembly; Belt Assembly, Rear Seat Inner W/Center, Passenger Side
- Manufacturer Note: DK. GRAY,TRIM1#
- Position: Passenger Side
- Replaces: 73470-02110-E0, 73470-02110-B0
- Part Name Code: 73470B
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73470-02110-B1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Corolla Submodels:
- CE, LE, S | 4 Cyl 1.8 L GAS
View related parts
2003 Toyota Corolla Lap & Shoulder Belt, Rear
Part Number: 73360-02190-B1
$122.19 MSRP: $172.97
You Save: $50.78 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Rear Seat; Seat Belt Height Adjuster Cover; Belt & Retractor; Rear Seat 3 Point Type, Outer Passenger & Driver Side Assemblies
- Manufacturer Note: DK. GRAY,TRIM1#
- Position: Rear
- Item Weight: 3.20 Pounds
- Item Dimensions: 11.8 x 10.8 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73360-02190-B1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Corolla Submodels:
- S | 4 Cyl 1.8 L GAS
View related parts
2003 Toyota Corolla Lap & Shoulder Belt, Rear
Part Number: 73360-02190-B0
$120.98 MSRP: $171.26
You Save: $50.28 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Rear Seat; Seat Belt Height Adjuster Cover; Belt & Retractor; Rear Seat 3 Point Type, Outer Passenger & Driver Side Assemblies
- Manufacturer Note: CHARCOAL,TRIM1#
- Position: Rear
- Item Weight: 2.20 Pounds
- Item Dimensions: 12.3 x 11.1 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73360-02190-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Corolla Submodels:
- CE, LE | 4 Cyl 1.8 L GAS
View related parts
2003 Toyota Corolla Buckle, Passenger Side gray
Part Number: 73230-02160-B1
$39.78 MSRP: $55.37
You Save: $15.59 (29%)
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Receptacle, Right; Latch; Belt Assembly, Front Seat Inner, Passenger Side
- Manufacturer Note: DK.GRAY,TRIM1#
- Position: Passenger Side
- Replaces: 73230-02160-B0, 73230-02160-E0
- Part Name Code: 73230
- Item Weight: 1.10 Pounds
- Item Dimensions: 14.1 x 11.2 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73230-02160-B1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Corolla Submodels:
- CE, LE, S | 4 Cyl 1.8 L GAS
View related parts
2003 Toyota Corolla Lap & Shoulder Belt, Driver Side
Part Number: 73220-02131-B1
$256.06 MSRP: $365.59
You Save: $109.53 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Left, Left; Belt & Retractor; Belt Assembly, Front Seat Outer, Driver Side
- Position: Driver Side
- Replaces: 73220-02131-E0, 73220-02131-B0
- Part Name Code: 73220
- Item Weight: 4.10 Pounds
- Item Dimensions: 10.4 x 7.1 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73220-02131-B1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Corolla Submodels:
- CE, LE, S | 4 Cyl 1.8 L GAS
View related parts
2003 Toyota Corolla Lap & Shoulder Belt, Passenger Side
Part Number: 73210-02141-B1
$256.06 MSRP: $365.59
You Save: $109.53 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Right, Right; Belt & Retractor; Belt Assembly, Front Seat Outer, Passenger Side
- Position: Passenger Side
- Replaces: 73210-02141-E0, 73210-02141-B0
- Part Name Code: 73210
- Item Weight: 3.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73210-02141-B1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Corolla Submodels:
- CE, LE, S | 4 Cyl 1.8 L GAS
View related parts
2003 Toyota Corolla Lap & Shoulder Belt, Rear
Part Number: 73360-02190-E0
Product Specifications
- Other Name: Belt Assembly, Rear Seat; Seat Belt Height Adjuster Cover; Belt & Retractor; Rear Seat 3 Point Type, Outer Passenger & Driver Side Assemblies
- Manufacturer Note: OAK,TRIM4#
- Position: Rear
- Item Weight: 3.20 Pounds
- Item Dimensions: 11.9 x 11.1 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73360-02190-E0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2003 Toyota Corolla Submodels:
- CE, LE | 4 Cyl 1.8 L GAS

2003 Toyota Corolla Seat Belt

Looking for affordable OEM 2003 Toyota Corolla Seat Belt? Explore our comprehensive catalogue of genuine 2003 Toyota Corolla Seat Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2003 Toyota Corolla Parts Questions & Experts Answers

Q: How to replace the rear seat belt on 2003 Toyota Corolla?
A: Replace the rear seat belt by starting with the removal of rear door opening trim boards from both right and left sides before taking out the rear seat cushion assembly. Both fixed and separated type rear seats require the removal of their back assemblies followed by their side cover and garnish on fixed type vehicles while separated types need their partition room boards. Use the hole slit to get the package tray trim panel assembly out from its position before working on the roof side garnish inner pieces on both sides. Start by removing the rear seat 3 point type belt assembly outer through floor anchor bolt extraction and proceed to take out the rear seat inner with center belt assembly from both right and left sides and finally the child restraint seat anchor bracket sub-assembly from the right side. Use 2 bolts to install the child restraint seat anchor bracket RH on the right side with a torque setting of 18.1 Nm (185 kgf.cm, 13.3 ft.lbf) before installing the rear seat inner with center belt assembly LH at a torque of 41.2 Nm (420 kgf.cm, 30 ft.lbf). Make sure the anchor part avoids contact with the floor panel protrusion. The rear seat belt assembly outer center requires replacement if the belt locking mechanism fails to engage with the proper 15 degrees but remains locked at more than 45 degrees. To complete this operation install the rear seat belt assembly outer center item by applying torque to 41.2 Nm (420 kgf.cm, 30 ft.lbf) and double-check both ELR locking functionality and the correct child restraint system fastener operation. For the rear seat inner with center belt assembly RH the installation procedure should be repeated, while torquing all bolts to 41.2 Nm (420 kgf.cm, 30 ft.lbf) and verifying the anchor part clears the floor panel protrusion. When assembly work completes move forward to place back the room partition boards and rear seat side components ready to finish the operation for both types of rear seat back assemblies.

Related 2003 Toyota Corolla Parts

Alternate Year Models

2002 Toyota Corolla Seat Belt 2004 Toyota Corolla Seat Belt