×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2003 Toyota Avalon Ball Joint
Control Arm Joint- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Ball Joint found
2003 Toyota Avalon Ball Joint, Lower
Part Number: 43330-09051$70.14 MSRP: $98.45You Save: $28.31 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Joint Assembly, Lower Ball; Suspension Ball Joint, Front; Lower Ball Joint; Front Passenger & Driver Side Assembly; Suspension Ball Joint
- Position: Lower
- Item Weight: 2.20 Pounds
- Item Dimensions: 5.5 x 3.3 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 43330-09051
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2003 Toyota Avalon Ball Joint
Looking for affordable OEM 2003 Toyota Avalon Ball Joint? Explore our comprehensive catalogue of genuine 2003 Toyota Avalon Ball Joint. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2003 Toyota Avalon Ball Joint Parts Q&A
- Q: How to service and repair the ball joint on 2003 Toyota Avalon?A: Service of the ball joint begins with removing the front axle hub before proceeding with lower ball joint removal through dust deflector screwdriver removal and subsequent cotter pin and nut removal. Service Tool 09628-62011 serves as the extraction method for the lower ball joint. The ball joint examination requires the knurling of the ball joint stud 5 times in reverse direction then forward direction before securing the nut. Meanwhile, the torque wrench enables a continuous 2-4 second turning period with the torque measurement recorded at the 5th turn. The recommended torque span is from 1.0 to 3.4 Nm (10 - 35 kgf-cm, 8.7 - 30 inch lbs.). The first step is to install the lower ball joint along with the nut while applying torque at 123 Nm (1,250 kgf-cm, 90 ft. lbs.). After that, put a new cotter pin in place before tightening the nut at 60 degrees when the holes do not align for the pin. The installation of a fresh dust deflector requires Special Service Tools which include 09316-60011 (09316-00011, 09316-00041), 09608-32010 along with a hammer for precise alignment of the holes that connect the ABS speed sensor to the dust deflector and steering knuckle. To complete the installation you must reinstall the front axle hub and verify the ABS speed sensor signal and front wheel alignment while steering angle sensor zero point calibration is required if VSC is present on the vehicle.