Other Name: Absorber Assembly, Shock; Front Shock Absorber; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
Replaces: 48510-39665
Item Weight: 9.50 Pounds
Item Dimensions: 26.6 x 8.2 x 7.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48510-09270
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2002 Toyota Tacoma Submodels:
Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
2002 Toyota Tacoma Shock Absorber
Looking for affordable OEM 2002 Toyota Tacoma Shock Absorber? Explore our comprehensive catalogue of genuine 2002 Toyota Tacoma Shock Absorber. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2002 Toyota Tacoma Shock Absorber Parts Q&A
Q: How to service the front shock absorber on 2002 Toyota Tacoma?
A: Begin front shock absorber service by taking out the front wheel before tightening it to 110 Nm torque. The disconnection of the shock absorber from its position on the lower suspension arm takes place by first removing 2 bolts at a torque of 39 Nm (400 kgf-cm, 29 ft. lbs.). Secure the shock absorber rod before removing the nut and retainer as well as the cushion and shock absorber and tighten the bolts to 25 Nm (250 kgf-cm, 18 ft. lbs.). Take off both the retainer and cushion from the shock absorber after removing it. The shock absorber analysis involves performing tests on the rod while extending and compressing it for detecting unusual noises as well as resistance issues which warrant replacing the component with a new shock absorber. Drilling must be performed on the cylinder after fully extending the shock absorber rod in order to release gas inside while observing chip safety during the process. Building the device requires steps that run in the opposite direction compared to uninstallation procedures.